Hunger現有的密封技術的發展已經有數十年。

HUNGER桿密封TDI系列描述及作用

HungerTDI系列密封屬于桿密封。它可以與礦物油一起使用，并且可以與水基液體，防火液體和壓縮空氣一起使用。TDI密封由兩部分組成，一個帶密封唇的PUR外部彈性環和一個帶耐磨PTFE復合材料的內部滑環密封邊緣。在配合之前，密封唇突出超過密封件的公稱直徑，并且當被壓靠在活塞桿上時。由此，在零壓力下提供有效的密封。

滑環產生一個環形腔，任何滲出的油都通過彈性體唇部被收集。滲漏油被密封邊緣阻擋，使得出現的活塞桿保持干燥。在那里轉彎時，被收集的油被迫回到了圓筒。

密封件的內密封面主要由內滑環組成，具有良好的滑動性能。與表面結合使用時在活塞桿上的Ra為0.1-0.3μm，實現了Zui小的摩擦等級，密封效率高，使用壽命長。沒有停滯，Zui重要的是沒有粘滑效應。

The Hunger TDI tandem seal for inside sealing is a piston rodseal.

It can be used with mineral oils and in modified form with waterbase fluids,

fire resistant fluids and compressed air.

The TDI seal consists of 2 parts, an external elastic ring ofPUR with a sealing lip and an internal slide ring of abrasionresistant PTFE-Bronze compound with a

sealing edge. Prior to fitting, the sealing lip protrudes beyondthe nominal diameter of the seal and when fitted is pressed againstthe piston rod. Effective sealing is thereby provided at zeropressure.

The slide ring is surrounded by the elastic ring and sealsaxially in direct contact with the piston rod. Under increasingpressure and compression of the sealing

ring, it is the slide ring which is predominantly pressedagainst the piston rod. The slide ring produces an annular cavitywhere any seepage oil that has passed

the elastomer lip is collected.

The seepage oil is held back by the sealing edge such that theemerging piston rod remains dry. During there turn stroke, thecollected oil is forced back into the

cylinder.

The internal sealing surface of the seal primarily comprises theinternal slide ring which possess excellent sliding properties.When combined with a surface finish

of Ra 0.1 - 0.3 μm on the piston rod, minimum frictionlevels areachieved with highly efficient sealing and long service life. Thereis no stiction, no unacceptable

heat generation, and above all no stick-slip effect.

HUNGER密封圈常用型號：

HUNGER TDI 14/22×7

HUNGER TDI 36/44×8

HUNGER TDI230*250*16

HUNGER TDI230*260*20

HUNGER TDI232*252*16

HUNGER TDI235*255*16

HUNGER TDI236*256*20

愛澤工業成立于2010年，定位于向制造工業提供制造技術和設備。代理經營世界的電氣自動化、機械與傳動、流體控制、儀器儀表、工具等產品。作為電氣，液壓以及氣動解決方案的合作伙伴，我們利用我們的全球協作團隊，為客戶提供解決方案，市場知識以及相關增值服務來幫助優化客戶的工作效率，提高可靠性和安全性，于成為工業產品和解決方案的優質渠道。

如果有任何關于HUNGER密封圈TDI 14/22×7-看很黃很黃的細節小說_夜夜爽天天好的疑問，請隨時致電我們，愛澤工業。我們將盡解決您的問題。

HUNGER密封圈TDI系列TDI 14/22×7介紹