Hunger現有的密封技術的發展已經有數十年。

HUNGER軸封FI系列應用及作用

HUNGER FI型密封主要用于活塞桿。它提供桿和殼體之間的導向和支承表面，并防止金屬與金屬之間的接觸。

FI由非常耐磨和低摩擦的POM-PTFEBronze復合物組成。它可以用于礦物油基液壓油，水油乳液和耐火流體以及壓縮空氣。

它有一個U形的橫截面，并與有角度的對接接頭分開。它可以螺旋地向內壓縮以便裝配到桿殼體中，在那里彈回到相應的安裝槽中。軸承槽布置將其固定以防止軸向移動。

HUNGER FI型密封可以用作彼此相鄰排列的單環或多環。

Hunger bearing ring type FI is mainly used on piston rods. Itprovides guiding and bearing surfaces between rod and housing andprevents mmbedl to mmbedl contact between them.

The FI consists of an extremely abrasion-resistant andlow-friction POM-PTFE Bronze compound. It can be used for hydraulicoil with a mineral oil base, for water-oil emulsions and forfire-resistant fluids as well as compressed air.

It has a U-shaped cross-section and is split with an angled buttjoint. It can be spirally compressed inwards for fitting into therod housing where it springs back out into correspondinginstallation grooves. The bearing groove arrangement secures itagainst axial movement.

The Hunger bearing rings can be used as single rings or multiplerings arranged adjacent to each other. The number of bearing ringsdepends on the expected side loads. The butt joints in adjacentbearings should be staggered.

Due to its excellent dry running properties the bearing ring FIcan also be applied behind a rod seal opposite the pressureside.

HUNGER密封圈常用型號：

HUNGER FI 36×19

HUNGER FI 70×24

HUNGER FI60*24

HUNGER FI32

HUNGER FI90*24

HUNGER FI70*24

HUNGER FI90x24

HUNGER FI320*35

HUNGER FI70x24

HUNGER FI130*24

愛澤工業成立于2010年，定位于向制造工業提供制造技術和設備。代理經營世界的電氣自動化、機械與傳動、流體控制、儀器儀表、工具等產品。作為電氣，液壓以及氣動解決方案的合作伙伴，我們利用我們的全球協作團隊，為客戶提供解決方案，市場知識以及相關增值服務來幫助優化客戶的工作效率，提高可靠性和安全性，于成為工業產品和解決方案的優質渠道。

如果有任何關于HUNGER密封圈FI 36×19-國產不卡一區二區電影網,日本學校拍的av番號的疑問，請隨時致電我們，愛澤工業。我們將盡解決您的問題。

HUNGER密封圈FI系列FI 36×19介紹