wikapcs-hp 緊湊型壓力開關 ip65 高壓700bar

測量相對壓力差壓

compact pressureswitch
ip 65, for high pressure ranges
model pcs-hp

compact pressureswitch model pcs-hpcompact pressure switch model pcs-hpcompactpressure switch model pcs-hp

                 compact pressure switch model pcs-hp

   applications
    ■ pressure monitoringand direct switching of electrical loads
    ■ for measuring points with limited space
    ■ for gaseous and liquid, aggressive and highlyviscous or contaminated media, also in aggressive ambience
    ■ process industry: chemical/petro-chemical, on-and offshore, technical gases, environmental technology,machinebuilding and general plant construction, water treatment,pharmaceutical industry

 

   special features
    ■ ingress protection ip 65, nema 4
    ■ ambient temperature -40 ... +85 °c
    ■ 1 switch point, spdt or dpdt with a highcontact rating of up to 15 a / ac 220 v
    ■ setting ranges up to 600 bar, max. testpressure up to 700 bar

 

   description
    these high- pressure switches have beenspecifically developed for safety-critical applications withlimited space. high and product manufacturing to iso9001:2000 ensures reliable monitoring of your plant. in production,the switches are traced by assurance software at every
step and subse are 100 % tested.the gauge adapters are madeof stainless steel, the diaphragm is, depending on the measuringrange and the
sensor code, made of inconel or coated with nbr or ptfe.each switchfamily is available in ip 65, ex-ia or ex-d versions (ex-ia seemodel pca-hp, data sheet pv 33.33).

    inorder to ensure as flexible operation as possible, the pressureswitches are e with micro switches, which make it possibleto switch an electrical load of up to 15 a /ac 220 v directly. forsmaller contact ratings, such as for plc applications, argon gasfilled micro switches with gold-plated contacts can be selected asan option. for two separate circuits the switches are alsoavailable in the version dpdt (double change-overcontact).

    by using a diaphragmwith an antagonist spring, the model pcs-hp pressure switch isextremely robust and guarantees optimal operatingcharacteristics.

 

   data sheetsshowing similar products:
   compact pressure switch, ignition protection typeeex-ia; model pcs; see data sheet pv 33.30
   compact pressure switch, ignition protection typeeex-d; model pca; see data sheet pv 33.31
   compact pressure switch, for high pressure, ignitionprotection type eex-d; model pca-hp; see data sheet pv33.33

 

   switch points
    the switch points can be set to yourre, free-ofcharge.
   pleasespecify:
    switch point, switchingdirection (e.g. switch point 1: 0.5 bar,falling)

    after unscrewing the case cover, switch pointadjustment can be made using the adjustment screw. the switch pointis settable within the entire measuring range with thefollowing
   generalrule:
    ■ define the value a = 2xrepeatability + switch hysteresis
    ■ if the pressure is rising, the switch pointshould be set between (min. + value a) up to max. of the settingrange.
    ■ if the pressure is falling, the switch pointshould be set between min. up to (max. - value a) of the settingrange.

   example:
   setting range: 0 ... 1 bar with one switch contact
    repeatability: 1 % of 1 bar = 10 mbar
    switch hysteresis = 15 mbar (see table settingranges)
    value a = 2 x 10 mbar + 15 mbar = 35 mbar
    if the pressure is rising, the switch pointshould be set between 35 mbar up to 1 bar.
    if the pressure is falling, the switch pointshould be set between 0 up to 965 mbar.
    for optimal performance we suggest the switchpoint lies between 25 % and 75 % of the setting range.

   electrical connection
    ? npt female, cable connection using internalterminal block, ground connection using internal and externalscrew,max. ground cable cross-section 4 mm2

 

   pressure switch certifiedper:
    ■ pressure e directive97/23/ec (ped, annex 1,category iv, safety accessories, module b +d)
    ■ low voltage directive 73/23 eec and 93/68eec

 

   dielectricstrength
    safety class i (en 61298-2:1997-06)

   mounting
    direct or wall mounting
    preferred connection location of the processconnection should be below. alternatively the instrument can beinstalled so that access to internals is from front of theenclosure and the electrical connection is placed onside.

   weight
   approx. 1.0 kg

 

   options
    ■ otherprocess connection, also with adapter
    ■ case made of stainless steel 316
    ■ electrical connection 3/4 npt, g 1/2 or m20 x1.5 (female)
    ■ cable gland on request
    ■ 2" pipe-mounting kit (with clampingelement)
    ■ version for off-shore 5) or tropicalisedapplication 5)
    ■ version for applications to nace 5) 6)
    ■ version for ammonia applications 5)
    ■ oil and grease free version for oxygenapplications
    ■ version to
    gas ex-ia dust ex-iad gr. ii cat. 1 gd5)electrical characteristics: ui = 30 v
                                                                        ii = 100 ma
                                                                        pi = 0.75 w
                                                                        ci = 0 μf
                                                                        li = 0 mh
   ■ accessories:
    pressure gauge valves model 910.11, seedata sheet ac 09.02
    barstock valves model 910.81, see datasheet ac 09.18

   

    5)inert gas filled contacts required
    6) only in connection with sensor codeg

   approvals andcertificates
    ■ sil 2 version 5)
    ■ gost-r certificate
    ■ test certificate *ca* (confirmation of theswitching accuracy)
    ■ test report *cp* (3-time listing of the switchpoint, requires witch point specification)
    ■ material certificate 3.1 per en10204

 

dimensions inmm

 

     orderinginformation
     model / case/ sensor code / switch contacts with version / setting range /process connection / electrical connection / switch point /switching direction / options

    example:pcs 2 p1 - 8/40bar - 1/4"npt-f - 1/2"npt-f

  

 

 

 

 

 

 

 

  

 

 

 

 

 

歡迎致電咨詢訂購wika pcs-hp 緊湊型壓力開關 ip65高壓700bar 測量相對壓力差壓

電話:010-51669912 56293293

傳真：010-51669912

636968574

郵箱：[email protected]

公司官網：https://www.zoriver.cn                https://www.zoriver.com.cn

本產品的品牌是WIKA/威卡，型號是PCS-HP，類型是機械壓力開關，額定電壓是220（V），額定電流是15（A），機械壽命是100（萬次），Zui大工作壓力是700bar（Pa），產品認證是PED證書，加工定制是是