產品簡介

全自動變壓器繞組的直流電阻是變壓器在交接、大修和改變分接開關后必不可少的試驗項目，也是故障后的重要檢測項目；變壓器直流電阻測試儀是變壓器、互感器、發電機、電動機和線路等直流電阻的快速測試設備。

全自動變壓器直流電阻測試儀是南澳電氣在保持原有變壓器直流電阻測試儀優點的基礎上，將高精度電源與直流電阻測試集成為一體的新型儀器，極大縮小了儀器的體積與重量，擴大了測量范圍。該儀器采用高性能單片機控制，操作簡單，攜帶方便，測試速度快，精度高，復測性好，抗干擾能力強，自動完成穩流判斷、數據采集處理和阻值顯示，能夠快速準確完成變壓器直流電阻的測量，是發供電單位、變壓器制造行業及大中型用電企業的理想測試產品。

南澳電氣武漢有限公司開發的NAZT系列變壓器直流電阻測試儀分為NAZT-3A、NAZT-5A、NAZT-10A、NAZT-20A、NAZT-40A、NAZT-50A、NAZT-100A等幾種規格型號

產品別名

直流電阻速測儀、變壓器直流電阻測試儀、變壓器繞組直流電阻測試儀、變壓器直阻速測儀、變壓器直阻快速測試儀、感性負載直流電阻速測儀、感性負載直流電阻快速測試儀、感性負載直流電阻測試儀

產品特性

輸出電流大、測量范圍寬、體積小、重量輕，操作簡單；

■測試速度快、測量精度高、復測性好、抗干擾能力強;

■具有完善的保護電路和放電報警功能，減少誤操作，可靠性強；

■采用高速微控制器，自動完成穩流判斷、數據采集和阻值顯示；

■采用192*64大屏幕液晶顯示，室外顯示清晰可見；

■內置大容量非易失性存儲器，可存儲500組測量數據；

■內置高精度實時時鐘功能：可進行日期及時間校準。

■自帶高速微型熱敏打印機：可打印測量及歷史數據。

注意事項

為了您和設備的安全，請操作人員仔細閱讀以下內容:

①在測量完感性負載時不能直接拆掉測試線，以免由于電感放電危及測試人員和設備的安全。本變壓器直流電阻快速測試儀的輸出端設有放電電路。關閉輸出時，電感會通過儀器泄放能量。一定要在放電指示完畢后才能拆掉測試線。

② 對于無載調壓變壓器，不允許測量過程中切換分接開關。

③ 測量過程中如果電源突然斷電，本變壓器直流電阻快速測試儀會自動開始放電，請不要立刻拆卸接線，至少等待30秒鐘后才可拆卸接線。

④ 測量時，其他未測試的繞組請勿短路接地，否則會導致變壓器充磁過程變慢，數據穩定時間延長。

⑤ 開機前請檢查電源電壓:交流220V±10%50Hz。

⑥ 試驗時請確認被測設備已斷電，并與其它帶電設備斷開。

⑦ 試驗時機殼必須可靠接地。

⑧ 試驗時不允許不相干的物品堆放在設備面板上和周圍。

⑨ 更換保險管和配件時，請使用與本儀器相同的型號。

⑩ 本變壓器直流電阻快速測試儀注意防潮、防油污。

Productintroduction

Transformer DC Resistance Tester also named Low ResistanceOhmmeter, It is a necessary testing project for transformertransition, overhauling and changing tap switch, it is also animportant detecting project after fault. Transformer DC ResistanceTester is a quick test e for testing transformers,generators, motors, lines and other DC resistance.

Transformer DC Resistance Tester is integrated high-precision powersupply and DC resistance test in a whole as a new instrument, whichnot only maintain the original advantage but also greatly reducesthe size and weight of the instrument and expands the measurementrange. The instrument adopts the high-performance single-chipmicrocomputer control, simple operation, easy to carry, fasttesting speed, high precision, good retest, stronganti-interference capability, automatically complete the judgmentof steady flow, data ac and processing and displayresistance, can accurately complete the measurement of transformerdc resistance, This instrument is the best testing e forpower plant, power supply enterprises, medium and large-sized powertransformer manufacturing industries and enterprises.

According to different level of current, Nanao Electric WuhanCo., LTD has developed six types of Transformer DC ResistanceTester, they are NAZT-5A,NAZT-10A,NAZT-20A,NAZT-40A,NAZT-50A,NAZT -100A,etc.

Alsocalled name

DC Resistance Rapid Tester, Transformer DC Resistance Tester,Transformer DC Resistance Rapid Tester, Transformer Winding DCResistance Tester, Inductive Load DC Resistance Rapid Tester,Inductive Load DC Resistance Tester, Sensual loaded DC resistancetester.

TheCharacteristics of the products

1. Large output current, wide measuring range, small size, lightweight, simple operation;

2. Fast test speed, high measurement accuracy, good retestcapacity, strong anti-interference capability;

3. With perfect function of protection circuit and discharge alarm,reduce the wrong operation, good reliability;

4. Adopting high speed micro-controller to automatically completethe judgment of steady flow, data ac and processing anddisplay resistance;

5. Using 192 * 64 large-screen LCD display, outdoor display isclearly visible;

6. Built-in high-capacity a non-volatile memory, can store 500 setsof measurement data;

7. Built-in high-precision real-time clock function, date and timecan be calibrated.

8. With high speed micro thermal printer: can print measurement andhistorical data.

Attentionshould take for your safety, please read thefollowing:

① After measured the inductiveloaded, the testing line can not be removed directly, avoid theinductor discharge that may endanger the testers and esafety. The output of DCuick tester set a dischargecircuit. Once turn off the output, the inductor will dischargeenergy through the instrument. Be sure to remove the testing lineafter the discharge instructions is finished.

② For no-load tap changer, is notallowed to switch the tap during the measuringprocess.

③If power is off suddenly duringthe measuring process., the DCuick tester willautomatically start to discharge, do not remove wiring immediately,need to wait for least 30 seconds ,

④ In the process of measuring,other untested windings should not grounded short circuit,otherwise it will cause the transformer magnetizing process sloweddown, the data stabilized longer.

⑤ Please checking the powersupply voltage before starting: AC 220V ± 10%50Hz.

⑥ Make sure the device is poweroff before testing, and disconnected with other energizede.

⑦ The casing must be groundedfirmly.

⑧ Notallow irrelevant items stacked on and around the devicepanel.

⑨ When replace the fuse andaccessories, please use this instrument with the samemodel.

⑩ The DC resistance tester pay attention to the moisture and grease.