類型自動噴漆槍品牌JONEYEA型號SA-101噴嘴口徑0.8/1.0/1.2MM材質鋁適用范圍噴漆涂料供給方法壓送式涂料噴出量300（ml/s）用途自動噴槍混合方式內混式噴槍特殊噴槍自動噴槍

源于專業技術的
—制造工藝
卓越的涂料傳遞效果
—高效省漆
人體工程學設計
—操控靈活
噴涂目標
—輕松實現完美效果
from professional technology--manufacturing process
excellent passing result of the material--efficient, paintsaving
ergonomics design--flexible controlling
spraying aim--realizing easily,perfect result

噴槍選定的標準
standard of the choosing of spray gun

噴漆工件的大??？
小型、大型噴槍的選定
小零件、玩具、小件物品、汽車修補等······小形（lph-50100w-101）
大零件、車輛、建筑物，生產線噴漆，大件噴漆等······大形
size of the item?
choosing of s:mall,large spray gun
small parts,toys,small thins,vehiclerepairing,etc......(small(lph-50/100/w-101)
large parts,vehicles,buildings,production line paint spraying,largeitems paint spraying...large
噴涂量或者面積？
涂料供給方式的選定（重力式·吸上式@壓送式）
少量噴涂，換色頻繁的情況下，使用重力式(g型）涂料杯方便少量及中量噴涂、換色噴涂多的
情況下，使用吸上式（s)型容器罐方便。
同色大量生產線噴涂等，用壓送式（p型）涂料泵和加壓容器罐方便。
or area?
choosing of the method of the sprayingmetrial(gravity,suction,pressure)
under the condition of small of paint,and changing colorfre,the gravity(g) will be used.under the conditon of smalland medium of paint,suction(s) will be used.under thecondition of using large of paint in the largeprodutionlinr,pressure(p) will be used.

噴涂的步驟和粘度？
涂料噴嘴口徑和空槍帽的選定
面漆（成品）噴涂等，要求特別微?；耐苛狭Ｗ?，根據涂料噴出量必須選擇空氣量多的型號，
特別是金屬性噴涂等，空氣量必須盡可能大。
涂料粘度和涂料噴嘴口徑的選定
必須根據涂料粘度選定噴嘴口徑，一般來說，涂料粘度低選擇小口徑，涂料粘度高選擇大口徑。
壓送式型號，噴嘴口徑小也能在低粘度到高粘度比較廣的范圍內使用。

procedure and viscosity of the spraying:
choosing of the nozzle gun cap of the spray gun:
when spraying the surface of the items,special particle isrequired,according to the paint spraying ,the type of largeair volume will be chosen,esp.the metal spraying.
the nozzle must be chosen according to the viscosity.generallyspeaking,if the viscosity is low,the small nozzle will bechosen,otherwise the big one.
the pressure type,the small nozzle can be used in a largefield,from low to high viscosity.

中野噴漆槍分類
kinds of spray gun of johgyia
重力式（上壺） 虹吸式（下壺） 壓送式 （壓力桶）
gravity (top pot) siphon (under pot) pressure(pressure barrel)
中野公司所有手動噴槍的壓縮空氣接口國內均為快速氣接頭，
all the air connector in johgyia are quick connector.
中野公司中小型手動噴槍的涂料接口均為1/4英寸（外螺紋）
manual control spray gun: the size of the connector is 1/4inch(male)
大型手動噴槍為3/8英寸（外螺紋）
large manual contro spar gun:3/8 inch(male)
也可根據客戶要求樣式配置。
the connector can also ne deployed according to the guests.

怎樣選用中野噴槍
how to choose johgyia spray gun?
底漆噴涂 面漆噴涂 小修補噴涂
primer paint surface paint repair paint
小幅面底漆噴槍 傳統高氣壓噴涂 高流量低氣壓噴涂 低流量中氣壓噴涂 環保省漆小修補噴槍
small format primer spray gun,troditional high pressure spraygun,high flow low pressure spray gun,low flow medium pressure spraygun, environmental repairing spray gun.
大幅面高效底漆噴槍 傳統面漆噴槍 環保省漆面漆噴槍 hvlp省漆高效面漆噴槍
large format efficient primer spray gun,troditional surface paintspray gun,environmental surface paint spray gun,hvlp efficientsurface paint spray gun

一、噴涂距離
1.distance of spraying:
傳統高壓噴槍：18~23cm hvlp高流量低壓噴槍：13~17cm
troditional high pressure spray gun:18--23cm
hvlp high flow low pressuer spray fun:13--17cm
二、噴槍移動方式
moving method

2.軌道式噴涂：噴槍與待噴件保持一定垂直距離，勻速往復運行。
track style spraying:keep the gun the item verticle,move forwardand backward
三、噴槍與涂裝表面角度
the angle of the gun and surface
角度：噴涂時噴槍頭部與被噴件永遠保持垂直。
angle:when spraying, the head of the gun and the painted iten willkeep verticle