用途特點：
1、本機廣泛用于各種行業成型刀模對各類非金屬材料的下料工作。本機的所有滑動部位都由液壓系統供油潤滑，減少磨損，更加延長了機器的使用壽命。
2、雙油缸，精密雙曲柄連桿平衡結構，保證每個裁斷位置的傳動深度相同。
3、特有設定構造，配合裁斷刀及裁斷深度設定，使沖程調節簡單、準確。
4、當上壓板快速下壓到裁斷壓板接觸裁刀時自動慢切，使裁斷物料Zui上層與Zui下層之間沒有尺寸誤差。
5、本機在設計時使中央結構供油系統自動潤滑，確保機器精度和延長機器使用壽命。

6、由于電機、油泵放置結構合理，其通風冷卻條件好，使機器運行安全，壽命長。
7、刀模設定準確，簡單易學。
8、電機功率小，能耗低。
a.oil is supplied to all sliding parts of this machine by the hydraulic system for lubrication, reducing wear and prclonging the service life of the machine.
b. the upper platen may automatically cut slowly as it presses down rapidly to the knife mold for cutting so that there will be no dimension errors between the upper and lower layersof the cutting materials.
c. structural changes during designing of this machine remove the need for the users to worry about possible oil leakage of the machine.
d. external motor and oil pump enable good ventilating and cooling conditions, safety operation and prolonged service life.
e. setting of the knife mold is rapid, accurate and easy-to-learn.
f. small motor power results in low power consumption.