標準號

ASTM E2315-2016

發布日期

2016

實施日期

廢止日期

無

分類號

07.100.99 

發布單位

US-ASTM

適用范圍

5.1x00a0;This procedure may beused to assess the invitro reduction of a microbial population of testorganisms after exposure to a test material.

1.1x00a0;This guide covers anexample of a method that measures the changes in a population ofaerobic microorganisms within a specified sampling time whenantimicrobial test materials are present. Several options fororganism selection and growth, inoculum preparation, sampling timesand temperatures are provided. When theue is performed as aspecific test method, it is critical that the above mentionedvariables have been standardized. Antimicrobial activity ofspecific materials, as measured by thisue, may varysignificantly depending on variables selected. It is important tounderstand the limitations of invitro tests, especially comparisons of results fromtests performed with different parameters. As an example, testresults of microorganisms re growth supplements or specialincubation conditions may not be directly comparable to organismsevaluated without those stated conditions.

1.2x00a0;Knowledge ofmicrobiologicalues is required for this procedure.

1.3x00a0;The values stated in SIunits are to be regarded as standard. No other units of measurementare included in this standard.

1.4x00a0;This standard does not purport to addressall of the safety concerns, if any, associated with its use. It isthe responsibility of the user of this standard to establishappropriate safety and health practices and determine theapplicability of regulatory re prior to use.