隨著我國基礎建設規模的進一步擴大，尤其是一些大型基礎工程的相繼開工，給液壓振動錘提供了廣闊的空間，使其成為不可或缺的關鍵設備。例如越來越大的深基坑工程，大型筒樁施工和大型鋼護筒施工工程，軟地基和旋挖鉆機配合施工的工程，高速鐵路和基礎路基施工項目，圍海吹填項目和治理中的砂樁施工，以及更為廣泛的市政施工項目，管道施工、截污處理及支護擋土工程等，都離不開液壓振動錘。

With the further scale of our infrastructure development,especially some operation of large basic engineering, which hasprovided capacious space for hydraulic vibratory hammer, and makeit become indispensable e Such as larger deep foundationproject, large tube pile construction and construction of largesteel sheathing tube, soft base and rotary rig e project,high speed railway and basic road construction project, reclamationproject and sand pile construction in treatment, moreover includesmunicipal construction project, tube construction, sewage treatmentand support and retaining works.

廣州振宇機械主要振動錘產品有：彈簧震動錘，電動機械振動錘等。22KW.44KW.90KW等產品。

，出售，出租。租售共享。

廣州振宇大功率高頻率振動錘，以高標準配置，高可靠性，高科技含量，良好的信譽，合理的價格，優質的售后服務。深受用戶的青睞，得到用戶的普遍好評。

There are various vibrating hammer inGuangzhou Zhenyu, such as spring vibrating hammer andelectro-mechanical vibrating hammer and so on, with the model of 22KW, 45KW and 90KW.

Guangzhou Zhenyu vibratory hammer hasthe characteristics of big power and high frequency, manufacturersdirectly sale, rent and share.

We have been widely praised by highreliability, high-tech content, good reputation, reasonable priceand excellent after services.

目前的振動樁錘可以分為兩大類。一類采用回轉式激振動器，也是通過偏心軸(重心與回轉中心不重合的軸或帶有偏心塊的軸)的旋轉運動來產生振動；另一類采用往復式激振器，通常是液壓油驅動活塞在缸體內往復運動而產生振動。采用回轉式激振動器的，如果激振器的驅動裝置為電動機，則是電動式振動樁錘;如果激振器的驅動裝置為液壓馬達，則是液壓式振動樁錘。這種液壓式振動樁錘在我國應用量越來越大，其中既有進口的，也有國產的。采用回轉式激振動器的振動樁錘，可以數臺、數十臺聯結起來同步振動，以用于超大型預制樁施工。

The vibrating pile hammer can be divided into two categories. Thefirst one is to use rotary vibrator, which means to producevibration through the rotary operation of eccentric axis (a shaftwhose center of gravity does not coincide with the center ofrotation or an axis with an eccentric block); Another isreciprocating vibrator, which hydraulic oil drives piston torepeatedly produce vibration in cylinder. When adopt rotaryvibrator, if its driving device is motor, then it is electricvibrating pile hammer; if its driving device is hydraulic motor,then it is hydraulic vibrating pile hammer. This hydraulicvibrating hammer has widely applied in China, some of them areimported and some are domestic. When use the vibrating pile hammerof rotary vibrator, well, several and dozens of units can beconnected to synchronize vibration for super large precast pileconstruction.

使用振動錘時應該要注意哪些事項 。工作人員在使用振動錘時，需要注意哪些安全事項呢？

What should be paid attention to whenusing a vibrating hammer？

 振動錘具有灌入力強、沉樁質量好、堅固耐用、故障少、使用方便、電源適應強、噪聲低等特點：  

  Vibratory hammer has the characteristics of stronginfusion force, good pile, reliable durability, lessproblem, confortable use, strong power adaptation and low noise,etc.

注意一、振動開始時，應用電鈴或其它方式發出信號，通知周圍人員離開。      

1.       When start to vibrate, itwill use electric bell or other methods to transmit signal toinform people to leave.

注意二、振動打樁機配合射水、吸泥下沉?xí)r，應與有關人員預先聯系，并在工作中互相關照。    

2.       When vibrating pilerig with water injection, suction mud sinking, the relatedpersonnel should be contacted first and take cared each other.

注意三、振動錘與樁帽，樁帽與管柱（或樁）平面要墊平，聯結螺栓應擰緊，并應經常檢查是否有松動。   

3.    Vibrating hammer and pile cover, pile coverand hollow tube pile surface need to even, and coupling bolt needto tighten and check whether loosen or not often.

注意四、振動錘的啟動應由低速檔逐檔加快到高速。       

4.       The operation of vibratinghammer should gradually from low gear to high gear.

注意五、振動錘在工作中應密切注視控制盤上電流、電壓的指示情況。若發現異響或其它異常情況，應立即停機檢查。

5.          Vibratoryhammer should closely pay attention to the condition of current andvoltage on the control panel during operation. If find somethingunusual, should stop the machine and check immediately.

注意六、經常檢查軸承溫度及軸承蓋螺釘是否有松動現象，要嚴格檢查偏心鐵塊聯結螺釘有無松動，防止發生事故。      

6.         Check whetherbearing temperature and bearing cap screw,  and strictly checkeccentric iron joint screw are loosen or not to preventaccidents.

注意七、接長管柱或樁及安裝樁帽時，工作人員必須佩戴安全帶。       

7.       Workers should wear safetybelt when jointing long string or installing pile hat.

注意八、振動下沉過程中，嚴禁進行機械的保養、維護工作。

8.       The maintenance of machinerymust be strictly inhabited during the vibratoryoperation.