類型普通車床控制形式人工型號C6246主電機功率5.5（kw）Zui大加工長度2000（mm）Zui大加工直徑460（mm）Zui大回轉直徑460（mm）主軸通孔直徑52（mm）安裝形式落地式布局形式臥式產品類型全新技術參數 technical specification 型號 model c6246b Zui大工件長度 max.distance ofbetween centers 1500mm(60″) 2000mm(80″) 床身上中心高 height of centers230mm(9″) 床身上Zui大工件回轉直徑 max.swing over bed φ460mm(18″) 刀架上Zui大工件回轉直徑max.swing over tool-post φ270mm(11″) 馬鞍槽上Zui大工件回轉直徑 max.swing overgap φ685mm(27″) 通過主軸孔Zui大棒料直徑 max.bar stock φ52mm(2″) 公制螺紋種數/螺距范圍metric thread number/pitches range 21/0.25～6mm 英制螺紋種數/每寸牙數范圍withworth thread number/pitches range 32/28～2t.p.i 主軸孔徑 bore ofspindle φ52mm(2″) 主軸轉速范圍 range of spindle spedds 34～1034rpm 主軸套內孔錐度taper of bore in spindle center sleeve morse no.4 主軸每轉刀架進給范圍橫向/縱向range of spedds of per revolution of spindle cross/longitudinal0.10～2.80mm/0.11～3.00mm 小刀架Zui的行程 max.travel of top tool-post150mm(6″) 刀架Zui大移動距面 縱向/橫向 max.travel of cross tool-postlongitudinal/cross 1420/280mm 1920/280mm 車刀刀桿截面Zui大尺寸 max.size oftool shank section 20×25mm 刀架回轉角度范圍 rotating angle range oftool-post ±45° 尾座主軸Zui大行程 max.travel of tailstock center sleeve 120mm尾座主軸椎孔 bore taper of tailstock center sleeve morse no.4 主電機功率 powerof main motor 4/5.5kw 冷卻泵電機功率 power of cool pump 120w 冷卻泵流量deilvery of cool pump 25l/min 機床外形尺寸 overall dimensions(l×w×h)mm2960×950×1350 3460×950×1350 包裝箱外形尺寸 packing size(l×w×h)mm3100×1×1140×1660 重量 凈重/毛重 weight net/gross kg 外銷/2850 內銷/2600