M602D01美國(guó)PCB原裝進(jìn)口

Platinum Stock Products; Low profile, industrial, ceramicshear ICP? accel., 100 mV/g, 0.5 to 8000 Hz, side exit, 2-pinconnector, single point ISO 17025 accredited calibration

052AE010BZ

052 cable, 10-ft,environmentally sealed MIL-type, 2-socket conn. to blunt cuttermination

Two-conductor shielded twistedpair cable with polyurethane jacket, 10 ft., push-on 2-socket MILwith environmental boot to blunt cut

Number of Conductors: 2

Cable Style: Multi Conductor - Shielded

Connector Style: MIL-C-5015

Connector Style: Blunt Cut

Cable Jacket Diameter: 0.25 in (6.35 mm)

English:SI: 
PERFORMANCENumber of Conductors22
Cable StyleMulti Conductor - ShieldedMulti Conductor - Shielded
Connector Model (sensor side)En√ironmental BootEn√ironmentalBoot
Connector Style (sensor side)MIL-C-5015MIL-C-5015
Connection Type (sensor side)2-pin2-pin
Coupling Method (sensor side)Push-onPush-on
Connector Style (termination)Blunt CutBlunt Cut
ENVIRONMENTALTemperature Range-58 to 250 °F-50 to 121 °C
ELECTRICALCapacitance36 pF/ft118 pF/m
PHYSICALCable Jacket Diameter0.25 in6.35 mm
Cable Jacket MaterialPolyurethanePolyurethane
Cable Jacket ColorBlackBlack
Conductor StyleStranded - 19 strands 32 AWGStranded - 19 strands 32AWG
Conductor MaterialTin Plated CopperTin Plated Copper
Conductor Diameter (20 AWG)0.04 in1.02 mm
Shield Type Over BundleBraid: 90% Minimum CoverageBraid: 90%Minimum Coverage
Shield Material Over BundleTin Plated CopperTin Plated Copper
Bend Radius (minimum)2.5 in63.5 mm
Weight0.67 oz/ft61.85 gm/m
Size - Length10 ft3.048 m
All specifications are at room temperature unless otherwisespecified.

English:SI: 
PERFORMANCESensitivity (±10 %)100 mV/g10.2mV/(m/s2)[1] Measurement Range±50 g±490 m/s2
Frequency Range (±3 dB)30 to 480000 cpm0.5 to 8000Hz[3] Resonant Fre kcpm25 kHz[4] BroadbandResolution350 μg3434 μm/sec2[4] Non-Linearity±1%±1 %[2] Transverse Sensitivity≤7 %≤7 %
ENVIRONMENTALOverload Limit (Shock)5000 g pk49050 m/s2 pk
Temperature Range-65 to +250 °F-54 to +121 °C
Temperature ResponseSee Graph %/°FSee Graph %/°F[4] EnclosureRatingIP68IP68
ELECTRICALSettling Time (within 1% of bias)≤2.0 sec≤2.0 sec
Discharge Time Constant≥0.3 sec≥0.3 sec
Excitation Voltage18 to 28 VDC18 to 28 VDC
Constant Current Excitation2 to 20 mA2 to 20 mA
Output Impedance<150 Ohm<150 Ohm
Output Bias Voltage8 to 12 VDC8 to 12 VDC
Spectral Noise (10 Hz)8.0 μg/√Hz78.5(μm/sec2)/√Hz[4] Spectral Noise (100 Hz)5μg/√Hz49.1 (μm/sec2)/√Hz[4] Spectral Noise (1kHz)4 μg/√Hz39.2 (μm/sec2)/√Hz[4] ElectricalIsolation (Case)>100000000 Ohm>100000000 Ohm
PHYSICALSize - Length1.65 in41.9 mm
Size - Width0.74 in18.8 mm
Size - Height0.845 in21.5 mm
Weight2.61 oz74.0 gm
Mounting Thread1/4-28 MaleNo Metric E[5] ue2 to 5 ft-lb2.7 to 6.8 Nm
Sensing ElementCeramicCeramic
Sensing GeometryShearShear
Housing MaterialStainless SteelStainless Steel
SealingWelded HermeticWelded Hermetic
Electrical Connector2-Pin MIL-C-50152-Pin MIL-C-5015
Electrical Connection PositionSideSide

All specifications are at room temperature unless otherwisespecified.

Product Notes

[1] Conversion Factor 1g = 9.81 m/s2.
[2] Zero-based,uares, straight line method.
[3] The high frequency tolerance is accurate within ±10% of thespecified fre
[4] Typical.
[5] 1/4-28 has no e in S.I. units.
[6] See PCB Declaration of Conformance PS023 or PS060 fordetails.

Accessories:

Supplied081A97Thru bolt 1/4-28(1)
Optional Versions:

(EX) Hazardous Area Approval- contact factory for specificapprovals

ENGLISHSI    Hazardous Area ApprovalEEx nL IICT4, -40°C<=Ta<=121°C, II 3 G    HazardousArea ApprovalEEx nL IIC T4, -40°C<=Ta<=121°C, II 1G    Hazardous Area ApprovalCl I, Div I, GroupsA, B, C, D; Cl II, Div I, Groups E, F, G; Cl III, DivI    Hazardous Area ApprovalEx ia IIC T4, AExiaIIC, T4    Hazardous Area ApprovalCl I, Div 2,Groups A, B, C, D; ExnL IIC T4, AExnA IIC T4

(M) Metric Mount

ENGLISHSI
Accessories:
M081A97Captive Mounting Bolt(1)

(TO) Temperature Output

ENGLISHSI    Temperature Output Range+36 to+250 °F+2 to +121 °C    Temperature ScaleFactor5.56 mV/°F + 32+10 mV/°C    ElectricalConnector3-Pin    Electrical Connections (PinA)Acceleration Output    Electrical Connections(Pin C)Temperature Output    ElectricalConnections (Pin B)Ground