環保模具非常受歡迎，大進模具廠，擁有環保設備，環評手續齊全，制造專業的環保水泥檢查井模具。

水泥檢查井鋼模具系列：污水井模具、雨水井模具、檢測井模具、電力井模具、集水井模具、沉泥井模具等。

水泥檢查井鋼模具常用規格：

內徑70cm、外徑90cm

內徑100cm、外徑120cm

內徑120cm、外徑140cm

內徑125cm、外徑165cm

內徑150cm、外徑190cm

水泥檢查井鋼模具由外模、內模、井口模具、井蓋模具、底座模具、連接孔組合而成。

水泥檢查井鋼模具材質：主板4mm、肋筋6mm。

水泥檢查井鋼模具使用方法：首先將井體鋼模具內腔噴一層機油，為了脫模方便，在內外模中間放入鋼筋網，然后將攪拌好的混凝土注入模具中，振動棒振搗，等混凝土初期凝固便可拆模，約24小時左右。

Environmental protection mold is very popular, Dajin moldfactory, with environmental protection e, environmentalassessment procedures are complete, manufacturing professionalenvironmental protection cement inspection well mold.

Cement inspection well steel mold series: sewage well mold, rainwell mold, detection well mold, electric well mold, catchment wellmold, caisson well mold, etc.

Common specifications for steel inspection tools for cementinspection wells:

Inner diameter 70cm, outer diameter 90cm

Inner diameter 100cm, outer diameter 120cm

Inner diameter 120cm, outer diameter 140cm

Inner diameter 125cm, outer diameter 165cm

Inner diameter 150cm, outer diameter 190cm

The steel mould for cement inspection wells is composed of anexternal mould, an internal mould, a wellhead mould, a well covermould, a base mould and a connecting hole.

Cement inspection well steel mold material: motherboard 4mm, rib6mm.

Cement inspection well steel mold use method: first, the wellsteel mold cavity spray a layer of oil, in order to demouldconvenience, in the middle of the internal and external mold intothe steel mesh, and then mix the concrete into the mold, vibratingrod vibration, and so on concrete initial solidification candemolish the mold, about 24 hours.