DY-2000型帶式濃縮脫水一體機

DY型污泥脫水機的詳細介紹

污泥脫水機技術特點:

污泥濃縮機與污泥脫水機相結合，可節省污泥濃縮池，對各種稀污泥有很強的適應性。

超長的重力濃縮區和擠壓脫水區，處理量大

采用回轉式汽缸清洗技術,清洗能力強,濾布清洗均勻,所需水量少.

大型框架式結構,堅固耐用,易檢修.

采用氣彈簧張緊和調偏，精度高，故障率低。

Technical features:

Thickener sludge and sludge dewatering machine combined savings ofsludge thickening tank, the various dilute sludge is a highlyadaptive.

Supernatural gravity concentration and the extrusion dehydration,handling a large volume.

Using rotary cylinder washing, cleaning ability, uniform cleaningfilter cloth, needed less water.

Large frame structure, durable and easy to repair.

Using gas spring tension and bias, high precision and low failurerate.

污泥脫水機工藝流程

1.重力脫水區：物料進入料箱，經過料箱的折流除砂后均勻的布在重力脫水區的網帶上，依靠重力的作用，脫出介質中的游離水。

2.楔形脫水區：物料進入楔形脫水區后，經過該段輕微的擠壓脫水，使介質的流動性完全喪失，從而保證物料進入回旋脫水區是不會被壓潰，重力脫水區及楔形脫水區的網帶依靠脫水板或?qū)ЬW(wǎng)輥支撐。通過該區段時兩側用封漿器防止?jié){料的流失。

3.回旋脫水區：該區段主要依靠上下網帶重合，中間夾住介質，通過網帶的張力和網帶繞回輥產生的擠壓力，擠出水分。

4.壓榨脫水區：該區段采用對輥偏心擠壓的方法，使局部產生高壓，從而提高介質濃度，完成固液分離。加壓方式一般為氣動加壓。

Process:

1.Gravity dehydration areas : materials into a bin after bin ofBaffle Desanding uniform after Bush gravity dehydration in the netbelt Gravity on the role of the media stepped out free water.

2.Wedge dehydration areas : materials into wedge dehydration zone,after the extrusion of minor dehydration, enable mobile mediacompletely lost, thereby ensuring materials into the roundaboutdehydration District will not be crushed, Gravity dehydration anddehydration wedge with the network rely on the board or dehydrationI. Roll network support. Through the zone when both sides used toprevent the closure pulp slurry for the loss.

3.Roundabout dehydration District : The next section on the mainnetwork with coincidence, in the middle clamping medium, throughthe net with the tension band around the net and roll back theextrusion pressure, extrusion water.

4.Dewaterer areas : the use of Section roll extrusion eccentricways in which local produce high pressure, thereby increasing mediaconcentration completeuid separation. Pressure normallyfor pneumatic compression.

污泥脫水機品質保證

1.機架：采用優質碳素鋼板折彎成形及焊接。表面采用先進的防腐技術處理，***后涂裝，既防腐又美觀。

2.輥體：以厚壁鋼管為主體采用烘裝工藝制成毛坯輥，輥體外圓、端面、軸頭全部掛耐腐蝕膠，而且在靠近軸承的部位設有防水臺。以保護軸承。對被處理介質有特殊有求的輥體，采用不銹鋼包覆或NIP合金鍍層處理。

3.脫水板：采用高分子PEA板中間鉆孔，該脫水板具有硬度高，耐磨性好，耐腐蝕和聚酯網之間的摩擦小等優點，主要安裝在重力脫水區和楔形脫水區。

4.封漿裝置：采用聚氨酯材料制成，既具有一定的彈性又有一定的耐磨性，安裝在楔形脫水區以防止?jié){料流失。

Assurance

1.Rack : Bending carbon steel forming and welding. Surfaceapplication of advanced anti-corrosion technology, with the finalpainting, both preservation and aesthetically pleasing.

2.Roller :A thick-walled pipe for the main process e usedscones made from rough roller, roller vitro round face, the firstaxis linking corrosion resistant plastic. Bearing in close to thesite with waterproof Taiwan. To protect bearings. To be treatedwith special media have re the body roll, use stainlesssteel or coated alloy coating treatment NIP.

3.Dehydration plate :PEA board polymer intermediate drilling, thedewatering plate with high hardness and good wear resistance.corrosion resistant polyester net and friction between the smalladvantages, such as the installation of the gravity maindehydration dehydration and the wedge area.

4.Pulp closure devices :polyurethane material, we have a certaindegree of flexibility is definitely the wear resistance, Wedgedehydration installed in the area to prevent the loss ofslurry.

標準配備uip:選配SelectMatching

主機體Mainframe污泥輸送泵Sludgefeeding pump

轉鼓濃縮系統Drum-concentratesystem絮凝系統Flocculatesystem
電控olbox清洗泵Fleanoutpump

空氣壓縮機Aircompressor污泥輸送裝置Sludgefeeding device

應用行業：

1.適用于大型市政污水,大型工廠及冶煉廠以及對污泥含水率有嚴格要求的項目,如冶金工業,鋼鐵工業,自來水廠,氣體脫硫。

2.適用于污泥量大，進泥濃度低的項目，如造紙、化纖、制糖、釀造等行業。包括未進行污泥濃縮的市政污水。

Application Industries :

1.Apply to the large municipal sewage, large factories and smeltersand the moisture content of the sludge, there are strictre for the project, If metallurgical industry, the steelindustry, water works, gas desulfurization.

2.Apply to the large volume of sludge, the sludge into a lowconcentration of items such as paper, fiber, sugar, and brewingindustries. Not include sludge thickening for the municipalwastewater.