產品簡介

NABLC-III氧化鋅避雷器測試儀是用于檢測氧化鋅避雷器電氣性能的專用儀器，該儀器適用于各種電壓等級的氧化鋅避雷器的帶電或停電檢測，從而及時發現設備內部絕緣受潮及閥片老化等危險缺陷。

NABLC-III氧化鋅避雷器測試儀操作簡單、使用方便，測量全過程由單片機控制，可測量氧化鋅避雷器的全電流、阻性電流及其諧波、工頻參考電壓及其諧波、有功功率和相位差，大屏幕可顯示電壓和電流的真實波形。儀器運用數字波形分析技術，采用諧波分析和數字濾波等軟件抗干擾方法使測量結果準確、穩定，可準確分析出基波和3～7次諧波的含量，并能克服相間干擾影響，正確測量邊相避雷器的阻性電流。本機配有高速面板式打印機，可充電電池，試驗人員在現場使用十分方便。儀器采用獨特的高速磁隔離數字傳感器直接采集輸入的電壓、電流信號，保證了數據的可靠性和安全性。

產品別名

氧化鋅避雷器測試儀、氧化鋅避雷器特性測試儀、氧化鋅測試儀、避雷器阻性泄漏電流檢測儀、氧化鋅避雷器帶電測試儀

產品特性 

1）NABLC-III氧化鋅避雷器測試儀采用大屏幕液晶顯示，中英文菜單操作，使用簡便。

2）高精度采樣、處理電路，先進的付里葉諧波分析技術，確保數據更加可靠。

3）儀器采用獨特的高速磁隔離數字傳感器直接采集輸入的電壓、電流信號，保證了數據的可靠性和安全性。

4）支持無線同步電壓取樣方式。 

5）具有阻性電流基波峰值輸出、邊相校正等功能。

6）儀器配有可充電電池、日歷時鐘、微型打印機，可存儲120組測量數據。

產品參數

全電流測量范圍

有效值 0—10mA，50Hz/60Hz

準確度：±（讀數×5%±5μA）

阻性電流基波測量準確
度（二次法不含相間干擾）

±（讀數×5%±5μA）

電流諧波準確度

±（讀數×10%±10μA）

參考電壓輸入范圍

有效值25V—250V，總諧波含量＜30%，50Hz/60Hz

參考電壓測量準確度

±（讀數×5%±0.5V）

電壓諧波測量準確度 

±（讀數×10%）

基波電流電壓夾角Φ

0-360°

電池工作時間

主機6小時

充電電源

220V±10%  50Hz/60Hz

充電時間

5小時

主機體積

325mm×280mm×140mm

主機重量

3.5Kg(不含線纜)

工作環境

溫 度

-10℃—50℃

濕 度

＜90%

Product introduction

NABLC-III zinc oxidearrester detector is a special instrument for detecting electricalproperties of zinc oxide surge arresters. The instrument issuitable for charging or power outage detection of various voltagelevels of zinc oxide surge arresters, timely detection of e insulation damp and valve aging and other dangerousdefects.

NABLC-III zinc oxidearrester detector is simple and easy to operate, the entiremeasuring process is controlled by microcontrollers to measure thefull current, resistive current and its harmonics, fre voltage and its harmonics, active power and phasedifference of zinc oxide surge arrester, a large screen can displaythe real waveform of voltage and current.

The instrument is adopt with digitalwaveform analysisues, used harmonic analysis and digitalfiltering software such as anti-jamming method to make the testresult accurate and stable, it not only can accurately analysis thefundamental and the content of 3 to 7 times of harmonic, but alsocan overcome the influence of the interphase interference torightly measuring the resistive current of edge phasearrester.

The instrument is e withhigh-speed printer panel, rechargeable battery, it is veryconvenient to test in the field. It uses a unique high-speedmagnetic isolation digital sensor to directly collect the signal ofinput voltage and current, ensure the data reliability andsecurity.

Alsocalled name

Zinc oxide arrester tester, intelligentarrester tester, anti-interference characteristics of zinc oxidearrester tester, leakage current arrester resistive detector, zincoxide arrester tester charged, zinc oxide surge arresters withoutgaps for ac tester, zinc oxide arrester tester

The Characteristics of theproducts

1.A large-screen LCD display, easy tooperate.

2.Adopting high-precision sampling,processing circuitry, advanced Fourier harmonic analysisuesto ensure the data is more reliable.

3.Using a unique high-speed magneticisolation digital sensor to directly collect the signal of inputvoltage and current, ensure the data reliability andsecurity.

4.Support wireless synchronizationvoltage sampling way.

5.With the function of fundamental peakoutput of resistive current, edge phase correction and soon.

6.The instrument is e with arechargeable battery, calendar clock, mini printer, it can store120 sets of measurement data;

The parameters of theproducts 

(1) Measurement range of full current:0-10mA RMS, 50Hz/ 60Hz; Accuracy: ±(reading x 5% + 5μA)

(2) Measurement accuracy of fundamentalresistive current  (secondary law without interphaseinterference): ± (reading x  5%+5 μA)

(3) Accuracy of current harmonics:± (reading x10% +10 μA)

(4) Input range of reference voltage:25V ~ 250V RMS, total harmonic content < 30%, 50Hz/60Hz

(5) Measurement accuracy of referencevoltage: ± (reading ×5% +0.5 V)

(6) Measurement accuracy of voltageharmonics: ± (reading ×10%)

(7) The angle of fundamental current andvoltage Φ: 0 ~360°

(8) Battery working time: Host 6hours

  Charging power: 220V± 10% 50Hz/ 60Hz Charging time: 5hours

(9) Dimensions: 325mmx 280mmx 140mm

(10) Weight: 3.5Kg (do not includecable)

(11) Operating environment: Temperature:-10-50 ℃ Relative humidity: <90%

Product information

1, Taken from the PT secondary voltagereference, you should carefully check the wiring to avoid PTsecondary circuit.

2, The voltage signal input line and thecurrent signal input line must not be reversed, if the currentsignal input line connected to PT3, test transformer secondary sideor measuring end, it may burn the instrument.

3, Where the input voltage and inputcurrent circumstances, do not plug the measuring line, so as not toburn the instrument.

4, The instrument is damaged, stop usingit immediately and notify the Company and do not repair yourselfout of the box. When the instrument is not working properly, firstcheck the power fuse is blown. After replacement of the same modelcan continue the insurance experiment. If the problem is morecomplex, please contact me directly.

5, The instrument must not be placed inhumid and high temperature environments.

6, The instrument is not used as a longtime (more than three months), the battery will run out of damage,so each interval of 3 months should be given to the instrument onecharge (6 hours or more), in order to ensure that the instrumentcan be used normally. Charging steps: Turn the power switch, plugin 220V power until the battery is indicating below the LCD screen90% or more.