7

背、座海綿材料

優質聚氨脂發泡材料（模塑成型）

大慶石化

8

座骨架

“s”彈簧，碳素彈簧鋼絲?3.2mm，2mm厚a級鋼板沖壓件

邯鄲鋼鐵公司，鋼材為邯鋼產，沖壓件為本公司。

9

座軸

?15、45#圓鋼

唐山鋼鐵集團公司

10

軸架、軸套

尼龍66注塑件

本公司

11

地腳板

60×6扁鋼，材質a3

邯鄲鋼鐵公司

河北帥康座椅有限公司

座椅尺寸圖

seat structure, performance and materialres
model: md-5593
1, the main technicalparameters of the following table.
chair chaircenter distance of 55cm high-93cm
blockhigh-46cm row distance re is not less than90cm
arm high 60cm seat load-bearing than orequal to 150 kg
the minimum length of 50cm foamdensity 40kg/m3
the maximum length of 68cm seatflip frequency is greater than or equal to 10 milliontimes
block 48cm deep45.5cm jingkuan
2, seatstructure:
this model seatsfrom the wooden handrail, backrest, seats (including the woodclosed shells, fabrics, seat steel guitar frames, polyurethanefoam) to connect flip institutions.
third, performancecharacteristics:
1,handrails, seat shell is a wooden plywood, high-fre of molding, epidermis of beech veneer, coateduency polyester sanding paint, sleek, elegant, due touency compressed into long-term use of non-crackingandhas good moisture-prooffunction.
2,backrest resilient core for high- cold-curing polyurethanefoam using a molding process, its shape is based on ergonomicprinciples of design, seat comfort hisaza notfatigue.
seats forhigh- soft-core material of high resilience polyurethanefoam and steel skeleton (skeleton built-in "s"-type spring), usingcold-curing a molding process.
it has a wood ring back edge multilayersandwich
for high- acrylicfabrics (polyester) blend high-level decorative fabrics, artificialsewing glued to the foam, the appearance of smooth,non-wrinkling.
fabric colors,varieties based on user choices, and make fire-retardant treatment,the flame-retardant properties by pressing gb/t5453-97 means ofchecking.the performanceindex can reach gb-5022-95 construction and fitting for fireprotection design of decorative fabric flammability b1-classstandard.
3,high- materials seat steel skeleton for the steel and steelplates, stampings welded carbon dioxide protection and is e "s"-type spring to increase flexibility in seatingcomfort.
4, on a wood beech handrailhandrails, a unique streamline shape and fine sanding paint evenmore elegant.
5, block-axis is 45 #high- refined steel shaft bracket 66 for the nylon injectionmolded parts, bushings for high- project polypropyleneproduction.
6, seat weight flip forflip, with re-refined calculations to determine after the test,flip a flexible, non-dry sound,maintenance-free.
7, all fasteners(bolts, nuts, booster) are used gb-style broiled black the surfaceof zinc treatment, there is a strong anti-corrosionability.
8,the seat can be modified to increase the air supply unit chair legsto adapt to different customer res.
no. name of material(model) origin
a handrail touency multilayer wood (birch) 4cm thick wooden factoryhebei li fa qu
2solid wood back side of seal carcasses multilayer sandwich boardfactory hebei li fa qu
3 letters wooden shell tosuppressuency multilayer (birch) 1.4cm thick wood factoryhebei li fa qu
4back lining of wood plywood pressing factory, hebei li fa quwood
5 beech wood handrailon the handrails of the company
6 fabric acrylic blended (kd) flame retardant up to b1-class standard in taiwan fujiknitting co., ltd.
7, back, seat foam materials,high- polyurethane foam material (molding) da
8skeleton "s" spring, carbon spring steel wire ?3.2mm, 2mm thicksteel plate stamping parts a-handan iron and steel company, steelfor the handan iron and steel industry, stamping parts of thecompany.
9 shaft ?15,45 # round steel tangshan iron and steel groupcorporation
10 axisplanes, sleeve nylon 66 injection moldingcompany
11 to 60 ×6 feet flat, material a3 handan iron and steel company
hebei shuaikang seat co., ltd.
seat size chart

2、靠背芯為優質高回彈聚氨脂發泡材料采用冷熟化工藝一次模塑成型，其造型是根據人體功能學原理設計，座感舒適久座不疲勞。

座位軟芯為優質高回彈聚氨脂發泡材料與鋼結構骨架（骨架內置“s”型彈簧），采用冷熟化工藝一次模塑成型。

背板為實木圈邊多層板夾芯

面料為優質腈綸（滌綸）混紡裝飾面料，人工縫制粘在泡沫上，外觀平整，不起皺。

面料顏色、品種根據用戶選擇，并可做阻燃處理，其阻燃性能按著gb/t5453-97方法檢驗。各項性能指標均可達到gb-5022-95建筑裝修設計防火規范中裝飾織物燃燒性能b1級標準。

3、座位鋼結構骨架為優質材料型鋼和鋼板，沖壓件采用二氧化碳保護焊接而成，并配有“s”型彈簧增加座位彈性舒適度。
4、上扶手為實木櫸木扶手，獨特的流線造型和精細打磨噴漆更顯高雅。

5、座軸為45#優質鋼精制，軸支架為尼龍66注塑件，軸套為優質工程聚丙制作。

6、椅座翻轉為自重翻轉，配重經過精細測算試驗后確定，翻轉靈活，無燥音，免維修。

7、所有緊固件（螺栓、螺母、墊高）均采用國標件表面鍍鋅式或煮黑處理，有較強的防腐能力。

8、本座椅可以改型，增加椅腿送風裝置以適應不同客戶要求。

2、靠背芯為優質高回彈聚氨脂發泡材料采用冷熟化工藝一次模塑成型，其造型是根據人體功能學原理設計，座感舒適久座不疲勞。

座位軟芯為優質高回彈聚氨脂發泡材料與鋼結構骨架（骨架內置“s”型彈簧），采用冷熟化工藝一次模塑成型。

背板為實木圈邊多層板夾芯

面料為優質腈綸（滌綸）混紡裝飾面料，人工縫制粘在泡沫上，外觀平整，不起皺。

面料顏色、品種根據用戶選擇，并可做阻燃處理，其阻燃性能按著gb/t5453-97方法檢驗。各項性能指標均可達到gb-5022-95建筑裝修設計防火規范中裝飾織物燃燒性能b1級標準。

3、座位鋼結構骨架為優質材料型鋼和鋼板，沖壓件采用二氧化碳保護焊接而成，并配有“s”型彈簧增加座位彈性舒適度。
4、上扶手為實木櫸木扶手，獨特的流線造型和精細打磨噴漆更顯高雅。

5、座軸為45#優質鋼精制，軸支架為尼龍66注塑件，軸套為優質工程聚丙制作。

6、椅座翻轉為自重翻轉，配重經過精細測算試驗后確定，翻轉靈活，無燥音，免維修。

7、所有緊固件（螺栓、螺母、墊高）均采用國標件表面鍍鋅式或煮黑處理，有較強的防腐能力。

8、本座椅可以改型，增加椅腿送風裝置以適應不同客戶要求。

2、靠背芯為優質高回彈聚氨脂發泡材料采用冷熟化工藝一次模塑成型，其造型是根據人體功能學原理設計，座感舒適久座不疲勞。

座位軟芯為優質高回彈聚氨脂發泡材料與鋼結構骨架（骨架內置“s”型彈簧），采用冷熟化工藝一次模塑成型。

背板為實木圈邊多層板夾芯

面料為優質腈綸（滌綸）混紡裝飾面料，人工縫制粘在泡沫上，外觀平整，不起皺。

面料顏色、品種根據用戶選擇，并可做阻燃處理，其阻燃性能按著gb/t5453-97方法檢驗。各項性能指標均可達到gb-5022-95建筑裝修設計防火規范中裝飾織物燃燒性能b1級標準。

3、座位鋼結構骨架為優質材料型鋼和鋼板，沖壓件采用二氧化碳保護焊接而成，并配有“s”型彈簧增加座位彈性舒適度。
4、上扶手為實木櫸木扶手，獨特的流線造型和精細打磨噴漆更顯高雅。

5、座軸為45#優質鋼精制，軸支架為尼龍66注塑件，軸套為優質工程聚丙制作。

6、椅座翻轉為自重翻轉，配重經過精細測算試驗后確定，翻轉靈活，無燥音，免維修。

7、所有緊固件（螺栓、螺母、墊高）均采用國標件表面鍍鋅式或煮黑處理，有較強的防腐能力。

8、本座椅可以改型，增加椅腿送風裝置以適應不同客戶要求。