BENDIX是大型制動器生產廠。

主營業務有：

ABS /穩定

執行器

空氣盤式制動器

空氣處理

減壓閥和調速器

液壓制動器零件

基礎鼓式制動器

松弛調節器

閥門

BENDIX減壓閥277558 RV-1-洞洞 國產精品_亞洲日韓一頁精品發布技術參數

安裝方式：直徑0.28英寸（2個）

產品類型：可調式

Zui大工作溫度：200°F（93°C）

Zui小工作溫度：-40°F（-40°C）

排氣口：排氣孔

出口端口1：1/4-18 NPT

供給端口：1/4-18 NPT

供應壓力：100 PSI

Mounting: ? .28 in. (2x)

Product Type: Adjustable

Maximum Operating Temperature: 200 °F (93 °C)

Minimum Operating Temperature: -40 °F (-40 °C)

Exhaust Port: Vent

Delivery Port 1: 1/4-18 NPT

Supply Port: 1/4-18 NPT

Delivery Pressure: 100 PSI

BENDIX減壓閥RV-1系列介紹

描述

RV-1? 減壓閥用于降低空氣壓力，并將其保持在低于供應壓力的恒定預設壓力。減壓閥在側面有一個 1/4" 的出口端口，底部有一個1/4" 的供應端口。閥體上鑄有兩個 9/32" 的安裝孔。可選配鎖線和密封，以防篡改設置。

操作

減壓閥的壓力設定由調節帽調節，調節帽對頂上的彈簧施加壓力。壓縮空氣從供應端進入，經出口端排出。當?shù)撞康目諝鈮毫Τ^(guò)彈簧對活塞頂部的作用力時，活塞向上移動，入口彈簧將入口閥推回其座位，切斷空氣供應。當出口管線中的壓力下降時，活塞上方彈簧的作用力會大于活塞下方的空氣壓力，允許活塞向下移動，打開入口閥，讓空氣通過出口排出。

如果出口管線中的壓力超過減壓閥的設定壓力，活塞下方的空氣壓力會大于彈簧對上的作用力，活塞將向上移動，離開排氣閥，使空氣通過排氣閥、空心活塞和閥導管，并通過調節帽的槽口排出。當彈簧的作用力超過空氣壓力，排氣閥密封，出口管線中的壓力就與減壓閥的設定壓力相同。

注意事項：RV-1?閥應在供給和出口壓力穩定且恒定的輕載應用中使用。不建議用于快速或脈沖式的供氣和/或排氣壓力。如有具體應用需求，建議咨詢 Bendix工程部門。

DESCRIPTION

The RV-1? pressure reducing valve is used to reduce air pressureand maintain it at a constant specified pre-set pressure below thatof the supply pressure. The pressure reducing valve has a 1/4"delivery port on the side and a 1/4" supply port on the bottom. Two9/32" mounting holes are cast into the body. A lockwire and sealare optional for a tamper proof setting.

OPERATION

The pressure setting of the pressure reducing valve isdetermined by the setting of the adjusting cap, which exerts aforce on the spring on top of the piston. Compressed air enters thesupply port and passes out the delivery port. When the air pressureon the bottom of the piston overcomes the force of the spring ontop of the piston, the piston moves upward and the inlet valvespring forces the inlet valve on its seat, closing off the supplyof air. As the pressure in the delivery line drops, the force ofthe spring above the piston becomes greater than the air pressurebelow the piston, allowing the piston to move downward, moving theinlet valve off its seat and allowing air to pass out the deliveryport.

If pressure in the delivery line exceeds the pressure setting ofthe pressure reducing valve, the force exerted by the air pressurebelow the piston will be greater than the spring force above thepiston. The piston will move up from the exhaust valve, permittingair to pass by the exhaust valve, through the hollow piston andvalve guide and escape through the slot in the adjusting cap. Whenthe force of the spring above the piston overcomes that of the airpressure below the piston, the exhaust valve is seated, and thepressure in the delivery line is the same as the setting of thepressure reducing valve.

Note: The RV-1? valve should be used in light duty applicationswhere the supply and delivery pressure is stable and constant. Arapid or pulsed supply and/or delivery pressure is not recommended.Please consult Bendix Engineering with specific applicationre

BENDIX減壓閥其他常用型號：

BENDIX 277144

BENDIX 277214

BENDIX 277215

BENDIX 277544

BENDIX 277558

BENDIX 277621

BENDIX 278427

BENDIX 279015

BENDIX 279716

BENDIX 279926

BENDIX 281857

BENDIX 282811

BENDIX 282983

BENDIX 283590

BENDIX 284157

BENDIX 285533

BENDIX 285775

BENDIX 288084

BENDIX 288397

BENDIX Pressure reducing valve NEW + ORIGINAL+ ONE YEARWARRANTY

愛澤工業成立于2010年，定位于向制造工業提供高端制造技術和設備。代理經營世界優質的電氣自動化、機械與傳動、流體控制、儀器儀表、工具等產品。作為電氣，液壓以及氣動解決方案的合作伙伴，我們利用我們的全球協作團隊，為客戶提供先進解決方案，市場知識以及相關增值服務來幫助優化客戶的工作效率，提高可靠性和安全性，致力于成為工業產品和解決方案的優質渠道。

如果有任何關于BENDIX減壓閥277558RV-1的疑問，請隨時與我們溝通（021-31006702）。我們將盡全力解決您的問題。

If you have any for BENDIX products, pleasefeel free to dial 0086-21-3100 6702/ send request email [email protected] / browse ourwebsite:www.ize-industries.com.

BENDIX減壓閥277558 RV-1-洞洞 國產精品_亞洲日韓一頁精品發布技術參數介紹