Plugand Drive EcoOBD2 Economy Chip Tuning Box for Diesel Cars 15% FuelSave

ID NO.:CTE038-03

Plug and Drive EcoOBD2 Economy Chip Tuning Box for Diesel Cars 15%Fuel Save

Save 15% Fuel consumption, with 2 years warranty

EcoOBD2 is a Plug&Drive Ready device to function the reducingfuel consumption for the economy and lower emission for theworld.

EcoOBD2 is easy to install. Just plug it into the OBD2 connector ofcars. EcoOBD2 fits all car from the year of 1996.

Plug and Drive EcoOBD2 Economy Chip Tuning Box for Diesel Cars 15%Fuel Save

Certificates : CE / FCC /  RoHS

It works based OBD2 protocols as remaping the Car's computer ECU.After driving 200 km road total, EcoOBD2 adjusts itself to the car,according to the drivers' habits and always keeps remaping the ECUto save fuel lower and immission.

What does EcoOBD2 make?

According to your driving habits,  EcoOBD2 makes new map inthe car's computer ECU for the vehicle's lower fuel consumption. Asyou driving much more KM/Mile, EcoOBD2 renews the map and adjustsitself to match your car perfectly for more fuel saving.

What is EcoOBD2 Chip Tuning Box?

EcoOBD2 is a Chip Tuning Box which can be plugged into OBD2connector of your car to decrease the fuel consumption of yourcar.

When it plugged into OBD2 connector, EcoOBD2 receives theinformation from the car computer ECU. With the received data fromECU,

EcoOBD2 adjusts the boost pressure, of fuel, injectiontiming and pressure to decrease the fuel consumption of yourcar.

EcoOBD2 Chip Tuning Box does not exceed the manufacturerre It works only within the tolerance of theengine.

EcoOBD2 does not damage the engine and the car computer ECU or notcause any negative effects to the car factory setting.

EcoOBD2 does not change any of the settings permanently. To turnback to the car's original settings, just unplug EcoOBD2 from OBD2connector.

EcoOBD2 is very easy to use

Plug EcoOBD2 into OBD2 connector of your car. And turn the ignitionon for 30 seconds. And Turn the engine on.

EcoOBD2 settings are optimal and the best for your car. Even theparameters are different for each vehicle,

there might not be a need to make an additionaladjustment.

EcoOBD2 will recognize your vehicle and your driving habits afteraround 200 km/150 miles driving,

and then EcoOBD2 adjusts itself to match your carperfectly.

EcoOBD2 works on the basis of changing the signal form ECU. Asuence, it changes the whole injection map

The main difference between EcoOBD2 Chip Tuning Box and Remappingtuning methods is that EcoOBD2 Chip Tuning Box is easily removable,and after unplug you go back to the factory settings. EcoOBD2 isthe cheap and safe type of tuning. Remapping is a permanent changeto your car.

This is the expensive tuning and you cannot remove it. EcoOBD2 ise with the engine protection function and safe for yourcar engine. EcoOBD2 produced on the printed circuit board in SMDtechnology. EcoOBD2 Chip Tuning Boxes are high

EcoOBD2 Economy Chip Tuning Box Installation andCalibration

1 - Pull the Car Key out from the ignition.

2 - Find OBD2 connector(*) in your car and Plug inEcoOBD2

3 - Insert the key into the ignition and twist the key to the firststage. (Do not start the car)

4 - Press the reset buttom for about 5 sec. After releasing thebuttom, just wait for a while about 30-54 sec. (EcoOBD2 willcommunicate and establish connection with ECU)

5 - Start up the engine.

6 - EcoOBD2 will recognize your vehicle and your driving habits,after around 200 km/150 miles driving and thus EcoOBD2 will adjustitself to match your car perfectly for more fuel saving.

Does your car have OBD2 connector?

On-Board Diagnostics, or "OBD," is a computer-based system builtinto all 1996 and later light-duty vehicles and trucks, as re the Clean Air Act Amendments of 1990. OBD systems are designedto monitor the performance of some of an engine's major componentsincluding those responsible for controlling emissions.

OBD2 necessarily for cars:

- Sold after January 1, 1996 in the USA

- Sold after January 1, 2001 in the European Union

- With diesel engine sold after January 1, 2003

Where located OBD2 connector in your car?

1 Driver's side, underneath dasboard, in the area under thesteering column,

2 Driver's side, underneath dasboard,between the driver-side doorand steering column area

3 Driver's side, underneath dasboard, between the steering columnarea and the center console

4 Driver's side, dashboard instrument/gauge area, between thesteering column and center console

5 Driver's side, dashboard instrument/gauge area, between thedriver-side door and steering column

6 Center console, vertical surface  left of vehiclecenterline

7 Center console, vertical surface right of vehicle centerline oron passenger side of center console

8 Center console, horizontal surface  in front passengerarea.

Package content:

1pc x EcoOBD2 Chip Tuning Box Interface

1pc x User Manuel English