SmartKeymaker OBD FOR Toyota for 4D chip(Support FOR Toyota Lexus SmartKey)

ID NO.：CTK009

Smart Keymaker OBD FOR Toyota for 4D Chip support FOR  Toyotaand FOR Lexus smart key system,support K line and CAN-BUSprotocols.It is a safe and fast key programmer for toyota and lexus4D chip.It can only work for 4D chip and smart key.

1.Safe and efficient: Only need 20 seconds to add onekey

2.It is safe for the security alarm system

3.Support all kinds of Toyota and Lexus smart key system: support Kline and CAN-BUS protocols

4.It is the most safe and fast key programmer device for Toyota andLexus series till now.

5.It supports all key lost

6.Please read the operation instructions and important noticebefore making a key

Function:

1.Use the main key to add the other keys:

Connect the programmer to the OBD port of the car, there are someshort beep sounds after power on, it enters auto search carstatus.

Press the start button twice to wake up the anti-theft module. Whenthe connection with the module is done successfully after 7seconds, there is a long beep 4-5 sounds (4 sounds means the systemis IV K system, 5 sounds means V CANBUS system). Wait 30 seconds,there are a long beep sounds, it means the car enter into add keystate.

2.Add smart key:

put the original car key (with the logo side) access to the startbutton, you should hear two beep sounds. SEC light will flashtwice; within 5 seconds, put the key close to the start button, youshould hear 2 beep sound, SEC light will flash twice; after learnall the smart key, wait 30 seconds till SEC light begin flash, andthe car will close adaptation mode automatically.

3.All the key was lost or only have vice key, need to doinitialization:

Press constantly the LED button, and plug into the OBD port of thecar, after two short beep sounds, finish press, it enters into autosearch car status.

Press the start button twice, in order to wake the anti-theftcomputer. When the connection with the Computer of car is donesuccessfully after 7 seconds, there is a long beep 4-5 sound (4sounds mean the system is IV K system, 5 sounds mean V CANBUSsystem), 5 seconds later, LED light go out. Wait 10-16minutes,there are a long beep sounds, and LED light flicker, itmeans the car enter into study key state.

All keys lost matching mode: Add every smart key which need toprogram(with the logo side)access to the start button, meanwhileyou will here two beep sound. SEC light will shine twice; After youfinisher studying all the smart keys, wait 30 seconds till SEClight shining, the system will Auto-close study state

Package list:

1 xfor Toyota 4D Chip OBD2 Keymaker

Notice:

1.Must use the right new smart keymaker, and follow the right stepabove, otherwise you take the conse

2.If the device can not match the key, and LED light shiningconstantly, pls clear the error code by using anti-theft systemsuch as T300.

3.After finishing program keys, the key can strat but the SEC lightis still turn on, maybe you use the vice key, only main key canmanually shut the study mode.

4.Don`t try to open the cover of programmer and dash board,otherwise you take the conse

5.This machine is only provided for the legal auto repair.Otherwise you will take the above conse

The Operating step as follows (read the using and the importance notice carefully)

1.   Turnthe ignition with the right 4D chip key.

2.   Connectthe programmer to the OBD port of the car, there are some shortbeep sounds after power on . When the connection with the Computerof car is done successfully, there is a long beep sound in 3seconds and the LED is on ,as well as the anti-light LEC, whichmeans the car is in the key programmer state .

3.   Takeaway the programmer from OBD.

4.   Matches2 PCS main key and 1 PC Vice-key to the IMMO computer .

Notice:2 new main key and 1 vice-key are needed to close theprogrammer procedure

a)   Closeall the car door

b)   Insertthe first new main key to the ignition for 5 seconds.

c)   Insertthe other main key to the ignition for 5 seconds.

d)   Insertthe vice-key to the ignition for 5 seconds.

e)   Thenew ignition key will be confirm by the new IMMO.

Only program 1 or 3 main keys to the IMMO computer (Manual closethe mode after complete the programmer)

a)   Closeall the car doors.

b)   Insertthe new key for 5 seconds .

c)   Insertanother new key for 5 seconds.

d)   Takeout the key from ignition.

e)   Insertthe first programmed main key ,and turn on the ignition for 5 times, then take it out.

f)    Thenew ignition key will be confirmed by IMMO

Notice:

1.   Must use the right for Toyota 4Dchip, otherwise you take the conse

2.   Don try open the cover ofprogrammer and dash board.

3.   This machine is only provided forthe legal auto repair.