供應美國科慕FEP 100中等熔體流動速率耐化學腐蝕適用于電線和電纜絕緣-婦欲亂肉人倫-亞洲國產一區二區三區
- 報價
- 請來電詢價
- 全國服務熱線
- 13549202718
- 品牌
- 美國科慕
- 型號
- 100
- 用途
- 電線和電纜絕緣，小型管道
供應美國科慕FEP 100中等熔體流動速率耐化學腐蝕適用于電線和電纜絕緣-婦欲亂肉人倫-亞洲國產一區二區三區，原廠原包，隨貨提供ROHS報告，UL認證，F(xiàn)DA認證，出廠材質證明（COA）及物質安全資料表(SDS)。
美國科慕FEP 100物性表：
| Physical | Nominal Value | Unit | Test Method |
Density / Specific Gravity | |||
-- | 2.13 | g/cm3 | ASTM D792 |
-- | 2.13 | g/cm3 | ISO 1183 |
Melt Mass-Flow Rate (MFR)(372°C/5.0 kg) | 6.8 | g/10 min | ASTM D2116 |
Melt Mass-Flow Rate (MFR)(372°C/5.0 kg) | 6.8 | g/10 min | ISO 12086 |
Water Absorption (24 hr) | < 0.010 | % | ASTM D570 |
| Mechanical | Nominal Value | Unit | Test Method |
Tensile Strength (Yield, 23°C) | 26.0 | MPa | ASTM D638 |
Tensile Stress (Yield, 23°C) | 26.0 | MPa | ISO 12086 |
Tensile Elongation (Break, 23°C) | 300 | % | ASTM D638 |
Tensile Strain (Break, 23°C) | 300 | % | ISO 12086 |
| Impact | Nominal Value | Unit | Test Method |
Notched Izod Impact (23°C) | No Break | ASTM D256 | |
Notched Izod Impact Strength(23°C) | No Break | ISO 180 | |
| Hardness | Nominal Value | Unit | Test Method |
Durometer Hardness (Shore D) | 56 | ASTM D2240 | |
Shore Hardness (Shore D) | 56 | ISO 868 | |
| Thermal | Nominal Value | Unit | Test Method |
Continuous UseTemperature 2 | 205 | °C | |
Peak Melting Temperature | 260 | °C | ASTM D3418 |
Melting Temperature | 260 | °C | ASTM D4591 |
| Electrical | Nominal Value | Unit | Test Method |
Dielectric Strength (0.250 mm, Method A (Short-Time)) | > 80 | kV/mm | ASTM D149 |
Electric Strength (0.250 mm) | > 80 | kV/mm | IEC 60243-1 |
Dielectric Constant | ASTM D150 | ||
1 kHz | 2.03 | ||
1.00 GHz | 2.03 | ||
Relative Permittivity | IEC 60250 | ||
1 kHz | 2.03 | ||
1.00 GHz | 2.03 | ||
Dissipation Factor | ASTM D150 | ||
1 kHz | 7.0E-5 | ||
1.00 GHz | 1.0E-3 | ||
Dissipation Factor | IEC 60250 | ||
1 kHz | 7.0E-5 | ||
1.00 GHz | 1.0E-3 | ||
| Flammability | Nominal Value | Unit | Test Method |
Flame Rating 3 | V-0 | UL 94 | |
Oxygen Index | > 95 | % | ASTM D2863 |
Oxygen Index | > 95 | % | ISO 4589-2 |
| AdditionalInformation | Nominal Value | Unit | Test Method |
Critical Shear Rate (372°C) | 22.0 | sec^-1 | Internal Method |
Guide DDR Range - for cableextrusion | 60.0 to 120 | ||
MIT Folding Endurance - film(200.0 μm) | 1.0E+4 | Cycles | ASTM D2176 |
塑膠原料; PA66; PC; POM; PC/ABS; PA6; PA46; PBT; ABS; EVA; K膠; LCP; PPS; PTFE; PFA; PVDF; FEP; 光擴散PC; 食品級 塑膠原料; 耐高溫PA6T/PA9T等
銷售：塑膠原料、塑膠輔料、塑膠制品、包裝材料、其他化工產品（不含危險化學品）。(依法須經批準的項目，經相關部門批準后方可開展經營活動)〓
東莞市秀方塑料有限公司主要從事塑膠原料貿易，代理及經銷各大品牌廠商生成的正品塑膠粒，品種齊全，長期穩定供貨，竭誠為廣大客戶提供選料服務，用最少的錢買最好的料，省時省力省錢。全國各地皆可發貨，一包也發，可開發票。公司主營產品: PC及PC合金,PA6尼龍，PA66聚酰胺，POM聚甲醛，PMMA亞克力，PBT，PET，ASA等工程塑料。ABS，PP聚丙烯，PS聚苯乙烯，LDPE低密度聚乙烯，HDPE高密度聚乙烯，LLDPE線性聚乙烯等通用塑...