耐高溫陶瓷電熱圈采用的不是一般云母撓線方式制作，而是采用陶瓷條穿絲方式，因此該產品的功率比普通的要高0.5~1.5倍。發熱體為進口圓絲陶撓成彈簧狀穿入陶瓷條圈成,外罩采用日本產不銹鋼,中間采用高溫隔熱保溫棉（硅酸鋁纖維板）防止溫度外泄。陶瓷條是高頻陶瓷具有傳熱快、堅硬不易碎、高溫不變形不易老化等特點。

1、傳熱快,發熱均勻、工作穩定。 
2、溫度不外泄、可節省電能，外罩用手觸摸不燙手，工作安全。 
3、產品的功率高，采用陶瓷條穿絲方式功率比普通的要高0.5~1.5倍 
4、歐美耐高溫發熱絲，具有散熱快，發熱均勻，高溫穩定等特點，可長時間在600－800℃使用。 
5、產品壽命長，由于原材料在高溫下老化比較慢因此產品壽命長。 
6、符合國家gb各項技術要求。功率偏差＋5%∽－10%。 
7、電氣強度：經電壓1500v/50hz正弦交流電壓試驗，經1min無擊穿現象。 
high temperature ceramic electriccircle is not generally used in mica torsion line production, butused to wear silk, pottery, so the products than the general powerto the 0.5 to 1.5 times. fever for the import of round wire taotorsion spring-like penetration into ceramic laps of the 10%,housing by the japanese production of stainless steel, hightemperature insulation between cotton (silicate fibreboard)temperature to prevent leakage. ceramics is a high-fre heat with quick, hard non-friable, high temperaturedeformation is not difficult to aging and so on. 
1, faster heat transfer, feveruniform, work and stability. 
2, a temperature not compromised,can save power, housings do not touch hot hand, worksafety. 
3, high-power products, ceramic,wear silk way than ordinary power to 0.5 to 1.5times 
4, europe and the united stateshigh temperature fever silk, with rapid cooling, heating uniform,high temperature stability characteristics, can be a long time inthe 600-800 ℃ use. 
5, longer product life, as rawmaterials under high temperature aging more slowly so long productlife. 
6, in line with the state gb thetechnical re power deviation +5% ∽-10%. 
7, the electrical strength: 1500v/50hz sinusoidal voltage ac voltage test, no breakdown by 1 minphenomenon.

該產品為非標產品，根據客戶要求定制，價格根據材料及尺寸的不同而不同，歡迎咨詢訂購。
咨詢電話 ，0514-88215066
業務

本產品的加工定制是是，品牌是楓葉，型號是FY-TC-01，材質是陶瓷電熱圈，功率是可定制（W），直徑是定制（mm），長度是定制（mm），主要用途是注塑機加熱，產品認證是9001