型號       過紙長度      印刷長度    工作速度（片/分）   

*          2400        2400mm       2200mm    （片/分）：60           5.5kw

*          版輥φ468mm   內檔2500 mm

model

paper length

printing length

working speed

power

roller

inner baffle

2500

2500mm

2200mm

60 pieces

5.5kw

φ468mm

2500mm

功能與特點：

*          整機墻板厚度實心為30mm、重要部件、均由高精度加工中心制做the thickness of the solid core wallboard is 30mm; the key parts are all made by high-precision machining center.

*          所有傳動軸、輥材質均為優質鋼，高精度動平衡校正、鍍硬鉻，表面研磨。all driving shaft and roller are high steel, high-precision dynamic balance correction, hard chromium plating and surface grinding.

*          主軸鎖緊采用高鋼性漲套鎖緊，比傳統鍵鎖緊精度更高，方便拆裝。main shaft locking using high rigidity of locking, have higher accuracy than the traditional key locking , convenient to dismounted

*          全齒輪傳動，鋼件淬火斜齒傳動，長期使用，套色精度高.all the gear transmission, steel parts inclined gear transmission, is used for a long time, high precision adjustment

*          整機傳動部位采用衛星搖擺式、消除連接間隙、適合長期高速印刷，三層、五層、七層紙板套色精度更高。the transmission part adopts satellite swing type, eliminating connection clearance, suitable for long time high-speed printing. matching color precision is higher for 3-layer, 5-layer and 7-layer.

主要技術參考：

*          機械速度（片/分）：80

*          經濟速度（片/分）：50—60

*          Zui大印刷面積：2200mm×1450mm

*          Zui大紙板尺寸：2500mm×1450m

*          標準印版厚度：3—8(可調)

*          開槽刀厚：7mm

*          max mechanical speed (piece/min):80

*          economic speed (piece/min): 50-60

*          max printing area: 2200mm×1450mm

*          max paperboard size: 2400mm×1450mm

*          thickness of standard printing plate: 3-8mm (can adjust)

*          thickness of slotting knife: 7mm

印刷部功能：

*          本機為鏈條送料半自動印刷機

*          采用重型地軌，保證設備運行及分離的穩定性

*          氣動隔膜泵供墨方式，可以任意調整上墨的流量，提高上墨均勻度。（不含氣泵

*          機采用360度電腦數控快速相位調整，讀數盤顯示，附有自動計數裝置。

*          全搖板設計，全齒輪傳動，減少套色誤差，調整軸間隙時齒輪咬合間隙不變。

*          進紙設計為十字滑塊，加強精度

*          主動齒輪全鋼件淬火，保證使用壽命。

*          墨輥部可氣動升起并單獨轉動，以防停機時油墨干涸

*          各機組電動分合體，自動鎖緊，放松，附有警鈴提示

*          各機組電動分離，配有碟璜式離合，氣動分離鎖

*          配置同步調刀，使機器調整時間大量減少，提高生產效率

*          開槽、壓痕、間隙調整采用自鎖臥輪合結構

*          采用噴淋油泵分組供油，提高設備潤滑

*          全設備使用φ25冷拔（不用鍍鋅管）調節，減少擰曲誤差

*          壓印軸與過紙軸全部直徑為φ130mm

printing part functions:

1. 1.      this machine is common printing machine of chain feeding.
2. 2.      adopt heavy rail to ensure the e’s stability of working and separating.
3. 3.      pneumatic diaphragm pump give the ink, you can adjust the flow of the ink at will to improve ink evenness (not including air pump)
4. 4.      adopts 360 degrees computer numerical control rapid phase adjustment, reading dial set, with an automatic counting device.
5. 5.      the rocker panel design and all the gears transmission to reduce the errors of color-matching. when adjust the axis space, the meshing gap remains the same.
6. 6.      the paper-feeding way was designed to cross slipper to strengthen the accuracy.
7. 7.      the gears are steel parts , ensure service life.
8. 8.      ink roller part can rise pneumatically and run alone, in case printing ink dries up when the machine stop.
9. 9.      every unit electrical separating and automatic locking, relaxing, with the alarm hints.
10. 10.  every unit is separated by electric, e with disc spring type clutch.
11. 11.  e with synchronous blade adjustment, reduce the time of adjustment to improve production efficiency.
12. 12.  slotting, creasing and gap adjusting adopt self-locking structure.
13. 13.  use spray pump group oil supplying to improve e lubrication.
14. 14.  all the e use cold-drawing (not galvanized tube) adjustment to reduce twisting error.
15. 15.  the diameter of coining shaft and paper shaft are both 130mm.

本產品的加工定制是是，品牌是新華，型號是2500，產品用途是紙箱生產，產品別名是水墨印刷開槽機，規格是單色雙色三色四色