bz-300電動式液壓鉗充電式液壓鉗電動壓線鉗150mm2銅鋁壓接
bz-300電動式液壓鉗，壓接頭可以在縱軸進行350°的輕松旋轉，使其可進入狹窄的角落工作
bz-300battery crimping tool for 16-300mm2 cables
for crimping16,25,35,50,70,95,120,,300mm2 lugs
技術參數:出力60kn行程17mm壓接次數320times沒飽和電壓(銅線 150mm2)壓接一次的時間3-6s(根據線纜的直徑大小)電池電壓18v電池容量3.0ah充電時間2小時包裝plasticbox配件模具:16,25,35,50,70,95,120,,300mm2電池2塊充電池1個油缸密封圈1套安全法密封圈1套型號:bz-300
電池壓接工具16-300mm2
微型計算機控制系統--——在壓接時自動檢測壓力，雙重安全保護。
壓力自動釋放功能——在壓力達到Zui大時，將停止工具沖壓的動力并釋放90%的壓力
配備了一個雙活塞泵，快速接觸壓接物后，在壓接過程中自動提供更高的壓力。
為了更好的進入狹窄的角落和其他困難的工作區域，壓接頭可在縱軸周圍350°輕松旋轉。
如果偏離了設定操作壓力或電量過低被確認時，信號聲將響起并伴隨紅色顯示閃爍。
一鍵控制——按下開關按鈕進行工作，松開一半的開關意味著停止壓接的動力，完全松開開關意味著活塞恢復到Zui初的位置。
鋰電池沒有記憶效應也不自動放電，即使長時間沒有運轉，工具也隨時可以運轉。與鎳氫電池相比鋰電池具有更低地功率重量比，表現為多50%的電量和更短的充電周期。
當工具在超過60°的溫度下長時間的工作時，一個溫度傳感器自動使工具停止工作并且故障信號會響起，這意味著工具無法正常工作直到溫度恢復正常。
item no: bz-300
battery crimping tool 16-300mm2
micro computer control system-automatically detect the pressurewhen it is crimping, with double safety protect.
pressure released automatically function-the tool stop forcing thepressing and release 90% pressure when the pressure reachedmaximum.
the tool e with a double piston pump which characterized bya fast approach towards the connecting material and transfer tohigh pressure automatically by slow crimping.
the crimping head can be smoothly turned by 350° around thelongitudinal axis in order to gain better access to tight cornersand other difficult working areas.
if a deviation from the set operation pressure or low batterycharges is identified, an acoustic signal sounds and a red displayflashes.
one key control-press the trigger to start working, half loosingthe trigger means stop forcing pressure, loosing fully means pistonreturn to the original position.
li-ion batteries do neither have a memory effect nor selfdischarge. even after long periods of no operation, the tool isalways ready to operate. in addition we see a lower power weightratio with 50% more capacity and shorter charging cycles compare tonimh batteries.
a temperature sensor makes the tool stop working automatically whenthe temperature over 60℃ under long time working, the fault signalsounds, it means the tool can’t continue work until the temperaturereduced to the normal.