深圳市吉順達潤滑油 0755-23092526
嘉實多潤滑油系列 > 齒輪油 > Castrol Optigear SyntheticX220/32/460/680
Castrol Optigear Synthetic X220/32/460/680 詳細說明?。g覽225次）
Castrol Optigear Synthetic X
Synthetic gear oils
Description
Castrol OptigearTM Synthetic X is based on synthetic hydrocarbonsand a special plastic deformation (PD)
and surface improvement additive package.
The additive package, when activated by high specific loads andcorresponding temperatures, helps to
e surface roughness without creating abrasion leading to thesurface improvement (plastic
deformation.)
Optigear Synthetic X is a CLP-HC gear oil (according to DIN 51502)and exceeds the minimum
re according to DIN 51517, part 3, CLP gear oils.
Application
Optigear Synthetic X may be used in spur gear, bevel gears orplanetary gear units and in heavy loaded
gear units, e.g. wind turbine main gears. It is also suitable forthe lubrication of oil-lubricated rolling
bearings.
Depending on the specific application, Optigear Synthetic X may beused in an operating temperature
range from -30 °C to +95 °C.
Advantages
· High load carrying capacity
· Superior micro pitting protection
· Excellent friction reduction
· Good filtration properties
· Excellent bearing lubrication suitabilityCastrol OptigearSynthetic X
18/11/2005, Global Version Number 1
Castrol, Optigear and the Castrol logo are trademarks of CastrolLimited, used under licence.
All reasonable care has been taken to ensure that the informationcontained in this publication is accurate as of the date ofprinting. However, such
information may, nevertheless, be affected by changes in the blendformulation occurring subsequent to the date of printing. MaterialSafety Data Sheets are
available for all Castrol Ltd products. The MSDS must be consultedfor appropriate information regarding storage, safe handling anddisposal of a product.
Castrol (UK) Ltd, Industrial Lubricants & Services
Wakefield House, Aspect Park, Pipers Way, Swindon, Wiltshire SN31RE, UK
Tel.: +44 (0)845 964 51 11, Fax: +44 (0)
www.castrol.com/industrial
Typical Characteristics
Test Method Units X 150 X 220 X 320 X 460
ISO Viscosity Grade ASTM D 2422 - 460
Density at + 15°C ISO 12185 /
ASTM D4052 g/ml 0.847 0.850 0.854 0.856
Kinematic Viscosity
@ 40°C mm2
/s 459
@ 100°C
ISO 3104 /
ASTM D445 mm2
/s 19.0 25.9 34.9 45.0
Viscosity Index ISO 2909 /
ASTM 2270 153
Flash Point, COC ISO 2592 /
ASTM D92 °C > 250
Pour Point ISO 3016 /
ASTM D97 °C -39 -33 -33 -27
Rust Test
Procedure A (24 hrs Distilled
Water) Pass Pass Pass Pass
Procedure B (24 hrs Synthetic
Sea Water)
ISO 7210 /
ASTM D665
Pass Pass Pass Pass
Copper Corrosion (3 hrs @
100°C)
ISO 2160 /
ASTM D130 1a 1a 1a 1a
FE8 wear test (81212MPB-
7.5/80-80)
Roller wear
Cage wear
DIN 51819-3 mg
mg
<10
<10
FZG test
A/8.3/90 scoring load stage
A/16.6/90 scoring load stage
DIN 51354 >12
12
FZG micropitting test FVA No. 54 >10
Foam Sequence I
ISO 6247 /
ASTM D892 mls <100/10
Ageing behavior, Increase of
viscosity at 100°C after 1000
h
ASTM D 2893 % 2
Subject to usual manufacturing tolerances.
Additional Information
Optigear Synthetic X gear oil can be applied by an oil can, oil cupreservoir, splash, spray mist or by
automatic dispensing e and central or circulationsystems.
It is compatible with mineral oils and esters. This means thattraces up to 3% of previous oil in the gear
case after draining will not pose any problems. However, thebeneficial effects of the special PD additives
are reduced when mixed with other gear oils.