產品特點 / productcharacteristics                        

● 支持兩個sata硬盤數據讀取。免工具拆裝，支持熱插拔。
● usb1.1/usb2.0 sata i和sata ii兼容。
● 高速usb2.0數據傳輸速率高達480mb/秒。
● e-sata接口傳輸速度可達3gb/秒。
● 支持所有2.5 '' / 3.5 '' sata 硬盤（Zui大支持2tb)。
● 支持 (1)m2插槽  (2) sd插槽  (3) mmc插槽  (4) ms插槽 (5) 迷你sd /t-flash/ micro sd,快速訪問多媒體文件。
● 支持高達32g記憶卡。
● 兩個擴展usb 2.0hub接口。
● 脫機克隆速度可達70mb/秒。
● 單鍵備份功能（僅在usb端口上）。
● led指示燈能夠指示電源和硬盤讀寫狀態。
● 支持系統（ window98/me/2000/xp/vista/win7/mac操作系統9.x/10.x/linux）

● support  sata hard disk reading at the same time,disassemble the hard disk without any tools, support hot plug.
● usb1.1/ usb2.0 sata i and sata ii are compatibility.
● the transmission rate of high-speed usb 2.0 is480mb / s.
● e-sata transfer speed up to 3gb/s.
● support all 2.5/3.5 sata hdd ( up to 2tb).
● support 32g(max) memory card.
● support 2 usb hubs.
● cloning speed up tp 70mb/s.
● one backup (usb port can only use).
● support m2/sd/mmc/ms/mini sd/t-flash/micro sd.
● led lights can indicate the situation of the power and hard diskreadingand writing.
● support systems ( window98/ me / 2000 / xp / vista / win7/ macopera-ting system 9.x/10.x / linux ).
基本操作 / the basicoperation                           

● 將sata硬盤插上硬盤座。
● 插上dc/12v電源到硬盤座。打開電源開關，電源指示燈亮。確認硬盤有轉起來。
●用usb線連接到硬盤座與電腦。打開我的電腦可看到盤符，讀盤時紅色信號指示燈亮。（如果是新的硬盤進行如下操作：我的電腦右鍵/管理/磁盤管理。可進行分區和格式化操作。）
● 按單鍵備份按紐可進行單鍵備作。 (詳見單鍵備份說明書)
● 可以用外部e-sata接口與電腦e-sata接口連接傳輸數據。
●脫機克隆時a,b位都插上sata硬盤（a為主盤，a盤≤b盤），打開電源開關，確認硬盤有轉動起來。然后連按兩下單鍵備份按紐，兩下時間間隔不超過5秒。25%紅色指示燈有閃起來為克隆正常。（注：脫機克隆時usb接口不能與電腦連接）

● insert ther sata to the harddiskseat.
● insert the dc / 12v power to the hard disk seat, turn on thepower switch,the power indicator light show blue, confirmation the hard disk whether working or not.1. insert thersata to the harddiskseat.
● insert the dc / 12v power to the hard disk seat, turn on thepower switch,the power indicator light show blue, confirmation thehard disk whether working or not.
● connect the hard disk base and the computer with the usb line.open my computer can see the letter, when reading dish, it can showthe red signal lamp. (if this is a new hard drive, you ought to doas follows: right key in my computer / management / diskmanagement, which can operation of partition and format. )
● push the one backup button can working of otb. (referred onetouchback up manua）
● use external e-sata interface connection with computer esatainterface to transfer data.
● when off-line cloning ,put a b two sata hard disk (amaster disk≥b son disk ,open the power suplly , clickthe button click again,with in 5s between the first click.it is cloning when the redindecating led at 25% flashs.（note: do not connect with pc whenoff-line cloning)
產品附件 / packinglist                                    

1. 主機
2. 光盤
3. usb線
4. 電源適配器（12v / 3a）
5. 操作說明書加otb使用說明書

1. one set of v5 host
2. one piece of cd
3. one cable of usb
4. one power adapter (12v / 3a )
5. operation and otb usage manuals

本產品的品牌是chandral，型號是895U2S，材質是鋁合金，支持容量是6TB以上，產品尺寸是135X115X80mm，傳輸界面是USB2.0，傳輸速度是480MB/sec;USB1.1/USB2.0