具體價格面議

樂泰硅橡膠平面密封具有耐介質性能，高溫作業配方以及紫外線固化配方，滿足現場固化制造條件的獨特產品。

硅橡膠墊片產品Zui適用于較大縫隙應用作業以及抗撓性法蘭和金屬?zèng)_擊法蘭的裝配。

基本性能

典型用途：高溫

顏色：黑色

縫隙填充：6.09mm

壓出速度，克/速度：600

溫度范圍：-54°c到260°c

固化方法：濕氣固化

固化速度：表干60分鐘，完全固化24小時

比重：1.34

肖氏硬度a:31

延長率%：355

抗拉強度：275     

  productdescription
loctite? product 5920 is a one component, room
temperature curing rtv silicone non-sag paste formulated for
low volatility applications, as in oxygen sensor equipped
general motors’ engines. good for applications up to 350°c.
typical applications
this product is used to fill voids and irregularities insurfaces
for a positive seal. it adheres to metal, glass, natural and
synthetic fibres, wood, ceramics, other silicone rubbers,
pointed surfaces and many plastic substrates. product 5920
can be used on all assemblies where an engine manufacturer
recommends room temperature vulcanising (rtv). it is also
used for electrical insulating applications.
approvals
this product meets general motors’ silicone volatility
specifications.
properties of uncured material
typical value
chemical type oxime silicone rubber
appearance metallic copper paste
specific gravity @ 25°c 1.05
viscosity @ 25°c thixotropic paste
flash point (tcc), °c >93

  generalinformation
this product is not recommended for use in pure oxygen
and/or oxygen rich systems and should not be selected as
a sealant for chlorine or other strong oxidisingmaterials.

  directions for use
clean mating surfaces to remove all traces of oil and old
gasketing material.
note: do not use petroleum cleaners such as mineral
spirits, kerosene, or gasoline to clean parts as they
will leave an oily film.
apply product 5920 in a continuous bead around all holes and
perimeters of the mating parts. assemble parts together while
sealant is still wet (approximately 10 minutes). place and
torque bolts.
sealant will become tack-free in less than one hour, and will
cure to a depth of 6mm (1/4 inch) within 24 hours.

 storage
product shall be ideally stored in a cool, dry location in
unopened containers at a temperature between 8°c to 28°c
(46°f to 82°f) unless otherwise labelled. optimal storage is
at the lower half of this temperature range. to prevent
contamination of unused product, do not return any material to
its original container. for further specific shelf lifeinformation,
contact your local technical service centre.

                         更多產品性能，可咨詢深圳市鵬科泰貿易有限公司

                               電話：0755-86381816

                               傳真：0755-86381822

本產品的分類是硅橡膠，品牌是樂泰，型號是5920平面密封硅橡膠，粘合材料是金屬，玻璃，天然和合成纖維，木