品牌ZHONGHUAN型號JBL-2500用途Low-e glass Metallzing別名Low-E glass Sputter Metallizing Line

本生產線既可以生產遮陽型低輻射玻璃，又可以生產高透型低輻射玻璃，也可以生產熱反射隔熱鍍膜玻璃，滿足不同地區的不同需要；還可以生產多種不同顏色(交涉膜,又稱彩色膜)的鍍膜玻璃、自潔玻璃，設備可按客戶要求訂造，滿足不同客戶的需求。低輻射玻璃（low-e）是在優質浮法玻璃原片上采用真空磁控濺射方法鍍制一層納米級的金屬銀層而成。可以使玻璃的輻射率從0.84降低至0.1，甚至更低，輻射熱損減少90％，從而達到節能、環保的目的。低輻射鍍膜玻璃能反射遠紅外熱能，與普通鍍膜產品相比能允許高可見光透過，低室外反射。合成中空后，擁有所有玻璃種類中Zui低的u值，既能保持室內通透明亮，又能保證冬暖夏涼。結構特點 1、采用新型的平面和柱狀磁控濺射射靶技術，提高鍍膜效果和效率。2、配備高精度的磁控電源、氣體流量和速度控制，自動化程度高，操作簡便，性能穩定。3、膜層均勻性好、附著力強、硬度高、抗腐蝕性好，可鍍多種顏色的膜系。4、真空室有傳統的立式設計和高效的臥式設計，滿足不同層次客戶的需要。

low emissivity glass (low-e) is made by coating ananoscale silver layer on the high float glass under themethod of vacuum magnetron sputtering. it can make the radiance ofthe glass reduce from 0.84 to 0.1, even more lower. the radianceheat waste is reduced 90%; the light transmittance is kept between30% and 80%; so as to reach the purpose of energy saving andenvironmental protection.
low-e glass can reflect far infrared heat energy, and comparingwith ordinary coated products, it allows high visible light to passthrough it, makes low outdoor reflection, synthesizes midheaven,and then provided with the lowest u value among all kinds of glass.it not only can keep indoor bright, but also can ensure cool insummer and warm in winter.
the main features:
1.this production line not only can produce sun-shading type oflow-e glass, high transparent type of low-e glass, heat reflectedheat insulation coated glass, to meet the needs of different areas;but also can produce coated glass with multicolour, self-cleannessglass, to meet the needs of different customers. our companyintroduces into the technology of ac medium frequency doubletargets sputtering from leybold, germany. the evenness of the filmhas superiority over which under other sputtering methods.
2.working method: horizontal type, half continuous production. theworkpiece comes in from one end and comes out form the other end.multilayer film is finished at a time.
3.it uses high class electrical source, high class gas flow, gasspeed controlling, to ensure the consistency of coating parameter.the film layer is even with strong adhesive force and highrigidity.