一、 雙線循環式作業生產線
  1.機長(l)（座板長度lx2+150）x工作站n+2000＝l m/n
  2.機寬：2xw+300
  3.工裝板m/m(wx1)400x500,500x600,600x700
工裝板帶電/不帶電
  4.工作站人數n(人)由客方依生產產品組裝站數決定工作站數量
  5.自動控制用阻擋器－進入水平移載機前裝置－設立臺組x2
二、 水平up-dn 動力移載機－180度水平移載裝置2組=90度x4
三、 雙線中間架橋－buffer conveyor2組
四、 附屬配件
  a.日光燈 40w單管高功率220v(單線全線)
  b.air 工具用滑軌 單線全線設立
  c.作業指示書看板 雙線a3type全線設立
  d.空氣配管 雙線3/4主管pitch每工位設立臺組
  e.插座 雙邊設立每工位設立臺組
  f.工具掛扁條 雙邊全線設立

one、 a line cycle type operation production line
  1.the machine is lengthways( l)( the bed plate lengthlx2+150) * work station n+2000= l m/ n
  2.machine breadth:2xw+300
  3.the overalls board m/ m( wx1)400 x500s,500 x600s,600x700s
the overalls board strap battery/ anti strap battery
  4.the work station number n( person) is depend on by asquare to
produce the product construction to stand few decision work station
  5.the automatic control uses to impede the machine － intothe
level to move before carrying the machine equiped the － toestablish the stand set x 2

two、 the level up- dn power moves to carry the machine － 180levels
of degree to move to carry to equip 2 sets=90 degree x4s

three、 a line builds a bridge the － buffer conveyor2 set in thecenter

four、 subsidiary fittings
  a.the fluorescent lamp 40 w list takes care of the high 220vs of power( single line whole line)
  b.the air tool establishes with the slippery track single line whole line
  c.a line of the operation direction  bookbillboard  a3type whole line establish
  d.compress a line of pipe arrangement 3/4 the each workpotential of the supervisor pitches establish the stand set
  e.the electric outlet is bilateral to establish the eachwork potential to establish the stand set
  f.the tool hangs the bilateral whole line of flat bar toestablish

本產品的加工定制是是，品牌是凱德