研磨級白剛玉微粉W50即日標JIS R6001標準320#白剛玉拋光粉

GB2477-83標準白剛玉W14研磨粉對應GOST-M14/電熔氧化鋁JIS1200#

GB2477-83標準白剛玉W14研磨粉對應GOST-M14/電熔氧化鋁JIS1200#用于涂料行業，因其耐磨性好，吸油率低，硬度高等優點，廣泛用于涂料填料。電熔氧化鋁是將純度99%含量的工業氧化鋁粉在電弧爐里經2050度高溫熔融冶煉結晶而來，因此電熔氧化鋁又被稱為電熔剛玉。電熔氧化鋁純度高、自銳性好、耐酸堿腐蝕、耐高溫、熱態性能穩定它硬度略高于棕剛玉，韌性稍低，切削力強。

 White corundum is used in the coating industry and is widelyused as a filler in coatings due to its advantages of good wearresistance, low oil absorption rate, and high hardness.Electromelted alumina is a type of industrial alumina powder with apurity of 99%, which is crystallized by melting and smelting at ahigh temperature of 2050 degrees in an electric arc furnace.Therefore, electromelted alumina is also known as electromeltedcorundum. Electromelted alumina has high purity, good selfsharpening, acid and alkali corrosion resistance, high temperatureresistance, and stable thermal performance. Its hardness isslightly higher than that of brown corundum, with slightly lowertoughness and strong cutting force.

GB 2477-83標準白剛玉W14研磨粉對應GOST-M14/電熔氧化鋁JIS1200#的主要性能特點：

在涂料產品中的配方中，除了樹脂基料以外，往往會添加一些填料起到填充、調節涂料相關性能等作用。作為涂料的填充材料，需要符合以下幾個基本要求：

1. 白度要高。不能影響涂料基料和顏料的顏色調配。

2. 分散性好。易分散的填料不僅可以降低涂料生產時分散填料的時間和成本，而且有利于涂料性能的發揮。

3. 化學穩定性和惰性。填料不會與涂料中的基料、顏料和其他填料發生反應。

4. 吸油率要低。低吸油率有利于提高涂料的臨界顏料體積濃度，節約樹脂基料。同時，與市場上主流的其他低吸油的顏料相匹配。

5.填料的粒度要準確，粒度范圍要盡量窄、盡量的集中。粒度窄的填料粉末能在涂料中起到空間位隔作用，使涂料中的各種材料顆粒更加均勻地分布。有助于保持涂料的性能一直性。

6. 流動性。良好的流動性（流平性），可以防止涂料在放置和存貯時不產生沉淀，有利于涂料的施工。

7. 比表面積適當，比表面積影響涂料的黏度、流動性、分散穩定性、沉降度和吸油量等性能指標。

The main performance characteristics of white fused aluminapowder：

In the formulation of coating products, in addition to resin basedmaterials, some fillers are often added to fill and regulate therelated properties of the coating. As a filling material forcoatings, it needs to meet the following basic re:

1. The whiteness should be high. It should not affect the colormixing of the coating base material and pigment.

2. Good dispersion. Easy to disperse fillers can not only reducethe time and cost of dispersing fillers during coating production,but also facilitate the performance of coatings.

3. Chemical stability and inertness. Fillers will not react withsubstrates, pigments, and other fillers in the coating.

4. The oil absorption rate should be low. Low oil absorption rateis beneficial for increasing the critical pigment volumeconcentration of coatings and saving resin base materials. At thesame time, it matches with other mainstream low oil absorptionpigments in the market.

5. The particle size of the filler should be accurate, and theparticle size range should be as narrow and concentrated aspossible. Narrow particle size filler powder can play a spatialsegregation role in coatings, making various material particles inthe coatings more evenly distributed. Helps maintain theconsistency of paint performance.

6. Li Good fluidity (leveling) can prevent coatings fromsettling during placement and storage, which is beneficial for theapplication of coatings.

7. The specific surface area is appropriate, as it affectsperformance indicators such as viscosity, fluidity, dispersionstability, sedimentation, and oil absorption of the coating.

電熔氧化鋁是經過高溫電熔結晶形成的氧化鋁材料，也被稱為電熔白剛玉微粉，化學性能符合作為填料的穩定性特點。它作為水性涂料、環氧涂料、聚氨酯涂料、氟碳涂料、氟碳粉末涂料的填料，具有以下優點：

1. 顏色白度高

2. 電熔氧化鋁微粉進過水力溢流分級，產品流動性和分散性好。

3. 化學穩定性強，不與酸堿等物質產生化學反應。

4. 吸油率低，經我公司客戶檢測，吸油率10%以內。

5. 水分工藝生產的電熔氧化鋁，粒度范圍集中，對大顆粒進行有效控制，保證顆粒的均勻一致。

6. 電熔氧化鋁的耐火溫度高，熱穩定性強。

7. PH值為中性。

8. 電熔氧化鋁微粉的硬度高，耐磨性強，可以增強涂料的耐磨性能。

9. 我廠生產的電熔氧化鋁微粉粒度齊全，水分微粉從63微米到0.5微米均可以提供。

Electromelted alumina is an alumina material formed byhigh-temperature electromelted crystallization, also known aselectromelted white corundum micro powder. Its chemical propertiesconform to the stability characteristics of being used as a filler.As a filler for water-based coatings, epoxy coatings, polyurethanecoatings, fluorocarbon coatings, and fluorocarbon powder coatings,it has the following advantages:

1. High color whiteness

2. The electric fused alumina micro powder is subjected tohydraulic overflow classification, resulting in good productfluidity and dispersibility.

3. Strong chemical stability, does not produce chemical reactionswith substances such as acids and bases.

4. The oil absorption rate is low, and according to ourcompany&＃39;s customer testing, the oil absorption rate iswithin 10%.

5. The electric fused alumina produced by the moisture process hasa concentrated particle size range, effectively controlling largeparticles to ensure their uniformity and consistency.

6. Electric fused alumina has a high refractory temperature andstrong thermal stability.

7. The pH value is neutral.

8. Electrolytic aluminum oxide micro powder has high hardness andstrong wear resistance, which can enhance the wear resistance ofcoatings.

9. Our factory produces electric fused alumina micro powder withcomplete particle size, and can provide moisture micro powder from63 microns to 0.5 microns.

GB2477-83標準白剛玉W14研磨粉對應GOST-M14/電熔氧化鋁JIS1200#物理指標

顏色

白色

硬度

莫氏9.0

使用溫度

1900 ℃

熔點

2250 ℃

比重

3.95g/cm3

體積密度

3.6g/cm3

堆積密度

1.55-1.95 g/cm3

晶形

多棱角

GB2477-83標準白剛玉W14研磨粉對應GOST-M14/電熔氧化鋁JIS1200#化學成分：

JIS3000#-JIS4000#

JIS6000#-JIS10000#

AL2O3

99.30% 以上

99.10% 以上

98.8% 以上

SiO2

0.15% 以下

0.18% 以下

0.20% 以下

NA2O

0.32% 以下

0.35% 以下

0.38% 以下

Fe2O3

0.10% 以下

0.10% 以下

0.10% 以下

CaO

0.05% 以下

0.05% 以下

0.05% 以下

白剛玉微粉的粒度型號：

1.   JIS日標：

JIS粒度

D0(微米)

D3(微米)

D50(微米)

D94(微米)

#240

≤ 127

≤ 103

57.0±3.0

≥ 40

#280

≤ 112

≤ 87

48.0±3.0

≥ 33

#320

≤ 98

≤ 74

40.0±2.5

≥ 27

#360

≤ 86

≤ 66

35.0±2.0

≥ 23

#400

≤ 75

≤ 58

30.0±2.0

≥ 20

#500

≤ 63

≤ 50

25.0±2.0

≥ 16

#600

≤ 53

≤ 41

20.0±1.5

≥ 13

#700

≤ 45

≤ 37

17.0±1.5

≥ 11

#800

≤ 38

≤ 31

14.0±1.0

≥ 9.0

#1000

≤ 32

≤ 27

11.5.±1.0

≥ 7.0

#1200

≤ 27

≤ 23

9.5±0.8

≥ 5.5

#1500

≤ 23

≤ 20

8.0±0.6

≥ 4.5

#2000

≤ 19

≤ 17

6.7±0.6

≥ 4.0

#2500

≤ 16

≤ 14

5.5±0.5

≥ 3.0

#3000

≤ 13

≤ 11

4.0±0.5

≥ 2.0

#4000

≤ 11

≤ 8.0

3.0±0.4

≥ 1.8

#6000

≤ 8.0

≤ 5.0

2.0±0.4

≥ 0.8

#8000

≤ 6.0

≤ 3.5

1.2±0.3

≥ 0.6

白剛玉微粉的用途：

1.   耐磨劑：陶瓷釉料、木地板耐磨層、耐磨涂料、耐磨膠水、聚氨酯樹脂、塑料玻璃、復合材料剎車片等制品的耐磨填料。

2.   研磨劑：硬質合金、有色金屬、不銹鋼、合金制品、鈉鈣玻璃等材料的研磨。

3.   磨具原材料：油石、砂紙、拋光蠟、橡膠砂輪、研磨液的主要磨料和金剛石干磨片的輔助材料。

4.   陶瓷：陶瓷膜、絕緣陶瓷板、蜂窩陶瓷等。