kd-500數控減震筒專用機床

一，主要用途：適應摩托車，電動車減震器鋁筒的深孔加工，工作效率高，加工精度高，穩定性強。一個工人可同時操作2臺機床。單班產量可達600-1200支/臺

kd-500cncshock absorber special machine ：adapt motorcycle,storage batterybike shock absorberaluminum cylinder of deep processing, high efficiency, a worker canalso operate 2 sets of machine tools. single class one machineoutput reaches 600 -1000teams.

二，主要性能：1，本機床采用重型鑄鐵底座，因?yàn)殍T件的減震能力高出鋼件10倍，同時鑄件內配有加強筋，抗扭曲，提高切削的熱穩定性，達到Zui大的剛性設計，2，雙支撐滾珠絲杠，采用中國臺灣制造商aba生產的優質導軌，精磨絲桿。滿足客戶高精度和使用壽命的要求。3，采用超高性能伺服電機作為進給電機，提供更高的尺寸精度。無丟步現象4，主電機品牌皖南電機，加以變頻控制，啟動平滑，節能，剎車時間可縮短至1秒。5，高性能主軸，6，抗震齒輪箱。7，內排屑系統。8，門控防爆高亮度照明燈。9,plc系統控制.抗干擾能力強。由金康達公司研制開發，有自主知識產權

。10.所有工藝參數通過觸摸屏輸入及修改。方便簡潔。

11，低氣壓保護裝置

12，刀桿堵屑保護功能

13，自動開門裝置（選配）

1,the machine using heavy iron base, because of the ability to shockthe casting 10 times higher than the steel parts, and at the sametime in the casting with to strengthen, distortion, improve theresistance of cutting and hot stability, the maximum rigiditydesign, 2, double support ball screw, the taiwan top manufacturersaba production ball screw and guide rail, meet customerhigh precision of the machine and the re of the servicelife.3,using high performance as the motor servo motor, providing higherdimensional accuracy. 4, main electromotor adopt domestic famousbrand in the motor, frequency conversion control, to start flowing,the energy conservation, the brake time can be reduced to 1second.5,6, high performance spindle, seismic gear box.7, inside the scraps dischargesystem.8, the door control explosion-proof high brightnesslighting. 9, plc control system. strong anti-interference ability.our company have independent intellectual property rights. 10. allprocess parameters through the touch screen input andmodify.convenientconcise.

三，主要技術參數：（aintechical data）

電機功率：主電機5.5千瓦，油泵電機3千瓦伺服電機1.5kwmotorpower: the main motor and oil pump motor 5.5 kw, 3 kw servo motor1.5 kw

1， 

motor power:6.5kw.進給（進刀）伺服電機1.5kw

2，Zui大加工孔徑      40-50mm      maxboring holediameter 40-50 mm

3， Zui長切削深度    500mmmax boringdepth 500mm

4， 內孔表面光潔度  0.2以上    innerhole surface finish 0.2,

5，主軸轉速 0-2800轉/分無極變速    principalaxis max speed 2800rpm

 6， Zui大流量  100l/min  maximumflow100l/min,

7，機器外形尺寸3000 x1200 x 1700dimension3000x1200  x1700mm.

8，機器毛重2500公斤grossweight 2500kg.

"KD-500減震器鋁筒深孔加工機床"的是否提供加工定制為否，品牌是金康達，主電機功率為5.5（kw），重量是2000（kg），Zui大鏜孔直徑為40（mm），工作臺尺寸是800（cm），用途為減震，工作形式是鏜，控制形式為數控，布局形式是臥式，動力類型為電動，適用行業是摩托車電瓶車，產品類型為全新，是否庫存是否