美國標準 94 設備和器具部件材料的可燃性能試驗測試
- 報價
- 請來電詢價
- 聯系手機
- 17603089103
- 微信號
- xunke2022
- 測試周期
- 5-7天
- 寄樣地址
- 深圳寶安
- 價格費用
- 電話詳談
| Testitem 測試名稱： | |
| TestFor Flammability of Plastic Materials for Parts in Devices andAppliances | |
| 設備和器具部件材料的可燃性能試驗 | |
| Testinfo 測試內容： | |
| Test Items | Relevant Standards |
| 水平燃燒(自撐料) | 94:1997, ASTM D635 |
| 94 HB | IEC 60695-11-10 |
| conditioning | 23 ±2°C and 50±5 percentrelative humidity for a minimum of 48 hours |
| 垂直燃燒(自撐料) | ASTM D3801-00/IEC60695-11-10 |
| 94 V0,V1,V2 | |
| conditioning | 23 ±2°C and 50±5 percentrelative humidity for a minimum of 48 hours and preconditioned inan air-circating oven for 168 hours at 70±1°C and then cooled inthe desiccator for at least 4 hours at room temperature, prior totesting. |
| 垂直燃燒(自撐料) | ISO 1035 |
| 94 5VA, 5VB | ASTM D5048 |
| conditioning | 23 ±2°C and 50±5 percentrelative humidity for a minimum of 48 hours and preconditioned inan air-circating oven for 168 hours at 70±1°C and then cooled inthe desiccator for at least 4 hours at room temperature, prior totesting. |
| 水平燃燒(泡沫材料) | ASTM D4986/ISO 3852 |
| 94 HBF, HF-1,HF-2 | IEC 60695-11-10 |
| conditioning | 23 ±2°C and 50±5 percentrelative humidity for a minimum of 48 hours and preconditioned inan air-circating oven for 168 hours at 70±1°C and then cooled inthe desiccator for at least 4 hours at room temperature, prior totesting. |
| 垂直燃燒(軟質塑料) | ISO 9773 |
| 94 VTM0, VTM-1,VTM-2 | ASTM D4804 |
| conditioning | 23 ±2°C and 50±5 percentrelative humidity for a minimum of 48 hours and preconditioned inan air-circating oven for 168 hours at 70±1°C and then cooled inthe desiccator for at least 4 hours at room temperature, prior totesting. |
| Sample Required and TurnaroundTime, 所需樣品及時間 | ||
| TestItems | TAT (WorkingDays) | |
| HB | 7 | |
| 12 pieces with the size of 125±5 mm long by 13.0 ±0.5 mm wide, and provided in the minimumthickness and 3.0 (-0.0 +0.2) mm thick. The 3.0 mm thick specimensare not necessary if the minimum thickness is greater than 3.0 mm,or the maximum thickness is less than 3.0 mm. The maximum thicknessis not to exceed 13 mm. The maximum width is not to exceed 13.5 mm,the edges are to be smooth, and the radius on the corners is not toexceed 1.3 mm. | ||
| 12 pieces with the size of (125± 5) × (13 ± 0,2) mm X thickness(需要提供測試的Zui小厚度樣品和3毫米厚度樣品,若樣品Zui小厚度大于3mm,或者Zui大厚度小于3MM,則可以不用提供3mm樣品;樣品Zui大厚度不超過13mm,Zui大寬度不超過13.5mm,) | ||
| V0, V1, V2 | 14 | |
| 17 pieces with the size of 125±5 mm long by 13.0 ±0.5 mm wide, and provided in the minimum andmaximum thicknesses. The maximum thickness is not to exceed 13 mm.Specimens in intermediate thicknesses are also to be provided andshall be tested if the rests obtained on the minimum or maximumthickness indicate inconsistent test rests. Intermediatethicknesses are not to exceed increments of 3.2 mm. Also, the edgesare to be smooth, and the radius on the corners is not to exceed1.3 mm. | ||
| 17 pieces with the size of (125± 5) × (13 ± 0,2) mmX thickness(需要提供測試的Zui小厚度樣品和Zui大樣品厚度；樣品Zui大厚度不超過13mm，如果Zui小厚度樣品和Zui大厚度樣品得出的結果不一致，則還需要提供中間尺寸樣品，中間尺寸厚度跨度不超3.2mm) | ||
| 5VA, 5VB | 14 | |
| 32 pieces with (125 ± 5) × (13±0.5) mm X minimum thickness AND 10 pieces 150 ± 5 × 150± 5 mmX minimum thickness | ||
| 32 pieces with (125 ± 5) × (13±0.5) mm X Zui小厚度 和 10 pieces 150 ± 5 × 150± 5 mmXZui小厚度 (Zui大厚度不超過13mm) | ||
| HBF, HF-1, HF-2 | 14 | |
| 17 pieces 150 ±5 mm long by 50±1 mm wide, in the minimum and maximum thicknesses covering thethickness range to be considered. Specimens tested by this methodare limited to a maximum thickness of 13 mm. Specimens inintermediate thicknesses are also to be provided and shall betested if the rests obtained on the minimum and/or maximumthickness indicate inconsistent test rests. Intermediatethicknesses are not to exceed increments of 6 mm. The maximum widthis not to exceed 50 mm. The edges are to be smooth and the radiuson the corners is not to exceed 2 mm | ||
| 17 pieces (150± 5) X (50± 1) mmX thickness (Zui小厚度和Zui大厚度都要提供, 當Zui大厚度和Zui小厚度的測試結果不一致，則中間的厚度也要提供，間隔不要超過6mm，試樣寬度不要超過50mm) | ||
| VTM0, VTM-1, VTM-2 | 14 | |
| 17 pieces, 200 ±5 mm in lengthby 50 ±1 mm in width, in the minimum and maximum thicknesses thatare to be tested covering the thickness range under consideration.Specimens in intermediate thicknesses are also to be provided andshall be tested. if the rests obtained on the minimum and/ormaximum thicknesses indicated inconsistent test rests | ||
| 17 pieces (200± 5) X (50± 1)mmX thickness (Zui小厚度和Zui大厚度都要提供，這樣可以認為測試結果對整個厚度系列有效，但當Zui小厚度和Zui大厚度的測試結果不一致時，中間的厚度也要提供) | ||
Others其他信息:
1.94垂直燃燒，要求前處理70度168小時, 所以不能申請加急服務
UL , 標準 , UL , 測試 , UL , 認證 , UL , 檢測
第三方檢測認證服務，電子電器安規EMC檢測，材料有害物質RoHS檢測，產品包裝運輸可靠性測試
技術服務、技術開發、技術咨詢、技術交流、技術轉讓、技術推廣。（除依法須經批準的項目外，憑營業執照依法自主開展經營活動）電子電器產品、化工產品、新能源產品、汽車材料及部品，預包裝食品、金屬材料及制品、玩具、兒童用品、紡織品，服裝、鞋材、裝飾品的檢測、認證及技術服務。
深圳市訊科標準技術服務有限公司是一家依據ISO/IEC17025運行的第三方檢測機構。我檢測中心在工業品、消費品、貿易保障及生命科學四大領域，提供有害物質檢測，安規檢測，EMC檢測，環境安全檢測，電子電器產品可靠性與失效分析，材料可靠性與失效分析，金屬材料、非金屬材料分析，紡織品、鞋類、皮革檢測，玩具產品檢測，建材與輕工產品檢測，汽車整車及其零部件檢測，食品、藥品、化妝品、飼料及食品包裝和接觸材料檢測，驗貨與合規服務，審核服務，計量校準...