Test item 測試名稱：Ceramic PlumbingFixtures 陶瓷衛浴裝置
Norm refer涉及標準：CSAB45.1
Testinfo 測試內容： ClauseTest Re Re 一般要求4.1Dimensions and tolerances 尺寸和偏差4.1.1Thickness 厚度4.1.2Tolerances 偏差4.2Glazing 釉面4.3Waste fitting openings,drainage, andoverflows 排水以及溢流裝置4.3.1Waste fitting openings and drainage排水口4.3.2Overflows 溢流口4.4Off-the-floor plumbing fixture supports衛浴懸空安裝系統4.5Non-vitreous ceramic plumbing fixtures非瓷陶瓷裝置4.6Additional res for water closets座便器的附加要求4.7Additional res for urinals小便器的附加要求5.1General 一般要求5.2Gravity flush tanks 重力沖洗水 flushing devices 壓力沖洗設備5.4Plastic Water closet tanks 塑料沖洗水 components of electro-hydraicwater closet 帶電的座便器5.6Dual-flush water closet 雙沖座便器 （ASME A112.19.14)6Tests 測試6.1Absorption test 吸水率6.2crazing test 龜裂測試6.3Surface examination 表面評估6.4Warpage test 變形量6.5Field-installed flange test 法蘭測試6.7Structural integrity tests forwall-mounted plumbing fixtures 掛壁式衛浴的整體結構6.9Joint seal test 接縫密封測試6.1Auger test 螺絲鉆測試6.11Condensation-free (insated) tank test絕緣水箱測試7Water closet tests 座便器測試7.1General 一般要求7.2Trap seal depth determination test水封測試7.3Trap seal restoration test 水封恢復測試7.4Water consumption test 用水量測試7.5Grane and ball test 顆粒和球體試驗7.6Surface wash test 表面沖洗試驗7.7Mixed media test 混合介質試驗7.8Drain line transport characterization test排水管道輸送特性7.9Overflow test for gravity flush tanks重力沖洗水箱的溢流測試8Urinal test 小便器測試8.1General 一般要求8.2Test apparatus and general instructions測試設備和說明8.3Trap seal depth determination test水封測試8.4Surface wash test 表面沖洗試驗8.5Dye test 染色試驗8.6Water consumption test 用水量測試8.7Tests for non-water-consuming urinals(ASME A112.19.19) 無水小便器測試9Markings, packaging, and installationinstruction and other literature 商標，包裝以及安裝說明Sampling re: 2 set ofcompleted samples with assembly instruction (ifapplicable）3 pcs of unglazed fragmentmaterial with 3200 mm2 3 pcs of glazed fragmentmaterial with 3200 mm2 樣品要求：全套樣品2套并包含安裝說明書（如適用） 3片3200 mm2的無釉碎片 3片3200 mm2的有釉碎片Turnaround time: normal(9 working days)；express（7 working days）所需時間：標準（9個工作日）；加快（7個工作日）
Sample for reference 參考圖片:
Sample Report 報告樣本：
