進口二手工業機器人報關流程

品牌名稱: 進口二手工業機器人報關流程 

   瑞士ABB、日本AMANDA、Fanuc、德國Kuka等全球的機器人制造企業正在加速開掘中國市場。日本拓野機器人執行總裁凌琳表示，機器人制造業目前主要由日本掌控，6家日本公司占了中國市場機器人銷售額的一半，而中國的4家機器人設備生產企業只占了中國市場的5%。目前，日本的在役機器人仍居全球之首，2016年達31萬臺，而中國、美國當年的數據分別為9.6萬和16.8萬臺，

Swiss ABB, Japan AMANDA, Fanuc, Kukaand other world famous German robot manufacturers are acceleratingdug China market. Japanese robot Tuoye CEO Ling Lin said, therobot industry is mainly controlled by the Japanese, 6 Japanesecompanies accounted for half of the market China robot sales, while4 Chinese leading robotic e manufacturing enterprisesaccounted for only 5% of the market China. At present, theJapanese in the battle of the robot is still the world's largest,in 2016 amounted to 310 thousand units, while the United States,China data were 96 thousand and 168 thousand,

    國際機器人品牌：ABB（瑞典），Cloos 克魯斯（德國），Comau 柯馬（意大利），Denso 電裝（日本），F(xiàn)anuc 發那科（日本），HYUNDAI現代（韓國），IGM 艾杰莫（奧地利），Kawasak i川崎（日本），KOMATSU 小松（日本），Kuka庫卡（德國），Mitsubishi 三菱（日本），MOTOMAN 安川（日本），Motoman 莫托曼（日本），NaChi越（日本），OTC (DAIHEN Corporation) 歐地希（日本），Reis 萊斯（意大利），SIASUN新松（中國），staubli 史陶比爾（瑞士）等

一：二手工業機器人進口報關清關流程及注意事項

1、新的機器人可以直接發貨到目的港口辦理報關手續，廣東的客人亦可以選擇發貨到中國香港，從皇崗口岸辦理進口報關，完成之后再用中港車提貨到您工廠。

1, the new robot can be shippeddirectly to the port of destination customs in Guangdong, guestscan also choose the delivery to Hongkong, fromHuanggang import customs declaration, and after thecompletion of delivery to your car factory in Hongkong.

2、如果是二手的工業機器人呢，您就不能直接發貨到目的港口了，因?yàn)橹袊?guó)檢驗檢疫局規定，所有二手的機械設備進口之前必須完成中檢檢驗，取得中檢證書后方可入境報關，如果發貨地不適合做中檢，可以選擇發貨到騰達中國香港倉庫辦理，騰達倉庫是中檢指定倉庫，對于各類突發特殊情況有很多實操經驗。

2, if the industrial robot used it,you cannot be shipped directly to the port of destination, becausethe provisions of China inspection and Bureau, must becompleted in the inspection before all mechanicale imported second-hand, made the inspectioncertificate before entry declaration, if delivery is not suitableto do the inspection, you can choose the delivery to TengdaHongkong warehouse management, warehouse in Tengda is seized in thedesignated warehouse, for all kinds of unexpected specialcircumstances there are a lot of practicalexperience.

3、取得中檢證書后，方可駁船到目的港口辦理報關手續。

3, inspection certificate, shall gothrough the formalities for customs declaration to the port ofdestination barge.

二：二手多功能工業機器人進口港口清關注意點：

1、口岸的監管部門查驗貨品，分為商檢查貨和海關查貨。查貨的要求，貨主、報檢員和報關員、監管部門的科員，同時在場。貨主，必須派一位相關熟識所進口貨物功能性能的技術員到場，以滿足監管部門在查驗過程中的技術提問。

1, the port regulatory authorities toinspect the goods, divided into commodity inspection and inspectionof goods. Inspection re, inspection and customsdeclaration, the owner, supervision department staff, at the sametime there. The owner must send a relevantproper import function performance of goods techniciansarrived at the scene, in order to meet the supervision departmentsin the inspection process of theuestions.

2、進口機電，尤其是進口二手機電，在貨主心里，要求安全，快讀，手續接近標準化。首先，通常來說，安全性是沒有問題的，因?yàn)檫M(jìn)口貨物在放行前，一直在海關監管下的碼頭擺放著，貨物沒有經過人手，一直擺放在集裝箱里。而碼頭的裝卸，也是標準化的常常規性作業。我認為，進口速度，應該是貨主的大訴求，畢竟，貨暢其流，可以加快投入使用或加速貿易資金周轉。這個也是檢驗進口代理供應商的服務指標之一。

2, the import of mechanicaland electrical, especially imported second-hand machinery, theowner in the heart, safety, fast reading, close to the standardprocedures. First of all, generally speaking, security is noproblem, because the import of goods before the release,has been placed under the customs supervision of the pier, thegoods have not been hand, has been placed in the container. Thedock loading and unloading, but also standardized regularoperations. I think the import speed should be thebiggest appeal, the owner of the cargo, after all, can be put intouse or accelerated trade accelerate capital turnover.This is also one of the indicators of service to checkthe import agent.

3、選擇進口代理服務公司的時候，當然，要咨詢其能否代墊碼頭、倉儲等小費用等客觀操作情況，別看這些小環節，有時候卻能為貨主節省人力物力。

3, when the import agentservices, of course, to consult whether on behalf of terminals andstorage and other small cost operation objective, don't look atthese small links, sometimes it can save manpower for theowner.

萬享供應鏈服務港口分公司：上海（總部）、大連港、天津港、青島港、北京機場、寧波港、廣州港、廈門港、深圳港、成都機場、武漢等歡迎來電咨詢洽談。

進口二手工業機器人報關流程