KQ膠 韓國雪佛龍菲利普KR03NW
- 報價
- 請來電詢價
- 聯系手機
- 13556776933
- 品牌
- KQ膠韓國雪佛龍菲利普
- 型號
- KR03NW高透明
- 產地
- 醫療級K(Q)膠長期有貨
KQ膠 韓國雪佛龍菲利普KR03NW高透明 醫療級K(Q)膠
華韻公司K(Q)膠高透明.高抗沖.醫療級K(Q)膠韓國雪佛龍菲利普KR-03
華韻公司K(Q)膠高透明.高抗沖.醫療級K(Q)膠韓國雪佛龍菲利普KR-03NW
華韻公司K(Q)膠高透明.高抗沖.醫療級K(Q)膠韓國雪佛龍菲利普KK-38
華韻公司K(Q)膠高透明.高抗沖.醫療級K(Q)膠韓國雪佛龍菲利普KR-01
華韻公司K(Q)膠高透明.高抗沖.醫療級K(Q)膠韓國雪佛龍菲利普KR-05
華韻公司K(Q)膠高透明.高抗沖.醫療級K(Q)膠韓國雪佛龍菲利普KR-99
華韻公司K(Q)膠高透明.高抗沖.醫療級K(Q)膠韓國雪佛龍菲利普KR-99HG
華韻公司K(Q)膠高透明.高抗沖.醫療級K(Q)膠韓國雪佛龍菲利普XK-44
華韻公司K(Q)膠高透明.高抗沖.醫療級K(Q)膠韓國雪佛龍菲利普KR-20
華韻公司K(Q)膠高透明.高抗沖.醫療級K(Q)膠韓國雪佛龍菲利普XK-40
華韻公司K(Q)膠高透明.高抗沖.醫療級K(Q)膠韓國雪佛龍菲利普1239B
華韻公司K(Q)膠高透明.高抗沖.醫療級K(Q)膠美國雪佛龍菲利普KR-03
K glue, alsoknown as k-resin, is styrene-butadiene copolymer (SB) , with goodtransparency, gloss, and impact resistance, and the price betweenPS and PC, therefore, widely used in the manufacture of non-fragiletransparent products, such as: cups, lids, bottles, hinge-typeboxes, hangers, food and pharmaceutical packaging supplies, and soon. K glue is made by copolymerization of styrene and butadiene,polystyrene has high transparency, good processability,disadvantage is brittle, butadiene can be polymerized into rubber,with elastic impact resistance, the two copolymers, the defects ofpolystyrene were improved, and the polymer with good comprehensiveproperties was obtained. K glue is an amorphous polymer, goodfluidity, and processed products, the appearance of smooth, shiny,high transparency. Suitable for injection molding, hollow blowmolding, extrusion and other processing methods, can be processedin most common e, without changing the e and mold.Thermal properties: because K adhesive is an amorphous polymer, itsmelting point is not obvious, the thermal deformation temperatureis 77 ° C, when the temperature is higher than 177 ° C, themobility of the polymer increases, but after the temperature ishigher than 260 ° C, the fluidity of the polymer increases, itsfluidity begins to be unstable. If the barrel temperature is toohigh or the residence time is too long at medium temperature, thepolymer will be degraded, which will lead to the appearance andperformance of the products become worse, such as the decrease oftransparency, discoloration, brittleness and so on.
2. OpticalProperties: K Glue is an amorphous polymer, which has lessinterference with light than dense crystalline polymers. As aresult, the turbidity is very small (1-3%) and the transparency isexcellent (89-91%) , in order to improve the transparency, we mustimprove the mold surface finish and select good processingconditions. Four. Chemical Resistance: the chemical resistance of Kgum is poor, organic compounds, such as alcohols, ketones, esters,and aromatic compounds will make k material soften and evendissolve, oils and diluted acids and bases can attack polymers, butthe rate and severity of erosion depends on the product's designand storage conditions. Therefore, the compatibility of the actualproduct with the K material should be tested.
高韌性 K(Q)膠
透明級,高光澤薄膜級***K(Q)膠,
抗紫外線耐低溫K(Q)膠,
食品級高剛性K(Q)膠,
耐沖擊高強度,高韌性增韌級K(Q)膠
KQ膠 , 韓國雪佛龍菲利普KR03NW高透明 , 醫療級K(Q)膠長期有貨
POM，PC，PBT，PA66，PC+ABS，K膠，EVA，LCP，鐵氟龍，PP,PMMA,PA6T,PA9T,PA46,PA11,PA12,PPS,ABS，TPU,TPV,PVC，GPPS,HIPS,HDPE,LDPE,TPX,SEBS,TPE,TPEE
塑膠原料、塑膠顏料、塑膠助劑、塑膠制品、其他化工產品（不含危險化學品）；貨物進出口、技術進出口。(依法須經批準的項目，經相關部門批準后方可開展經營活動)〓
工程塑膠：POM、PC/ABS .PA66、PBT、PC、K膠.. PMMA、PET.PPS. LCP.. PA6、PA9T，PA46.，PA12,PA11, PA6T， PET、PPO、 , 硬膠類：ABS、HDPE,HIPS、GPPS、AS、SAN..ASA .K膠； 軟膠類、彈性體：PE、PP、EVA,. PVC、TPR、TPE、TPU， TPV、POE. ...