ethernet distance extension via coaxial

the ccpam1001 has high-performance ethernet-over-vdsl2 productthat converts between twisted pair (utp) and coaxial. it is basedon two core networking technology: ethernet and vdsl2(very-high-data-rate digital subscriber line 2). this technologyoffers the absolutely fastest data transmission speeds overexisting coaxial cable without the need of rewiring. when using apair of ccpam1001 converters back to back, they connect between twofast ethernet lans via coaxial cable. on the utp side, theccpam1001 uses a modular eia / tia 568 rj45 connector that supportscategories 3, 4, 5 or above wiring and connects to distance up to100 meters (328 feet). on the coaxial cable side, the ccpam1001utilizes a bnc connector and supports a 50ohm cable and distance upto 1.6km. it is ideal for extending the distance and signalconversion by transmitting the ethernet data from the coaxialcable.

cost-effective / quick upgrade legacy devices to all-ipnetwork
anycan"s ccpam1001 converter provides a quick replacement andsmooth migration solution from existing analog system to fulldigital system. for example:
　　　　 ?cable tv to iptv
　　　　 ?analog camera to ip camera
the ccpam1001 combines the well proven ethernet and vdsl technologyto transmit the ethernet format data by using vdsl signaling overthe most widespread coaxial cable. therefore, it is very good forupgrading legacy devices to new digital devices of ip-based networkbecause almost every house or block on the street could use theexisting coaxial cable to transmit data to the internet and thewhole building could share the internet line in the wide networkarea with minimum cost. reuse the exist cable instead of new wire,it saves wiring cost made by people and makes coaxial cable andethernet line which cover anywhere.

easy installation
the converter is plug and play without configuring any software andalso fully compliant with all kinds of network protocols. moreover,the rich diagnostic leds on the front-panel provide the operatingstatus of individual port and the whole system. there are twoselectable models of the ccpam1001, one is used for client side(cpe) and the other is central side (co).

key features

?cost-effect vdsl2 co / cpe bridge solution
?one box design, co / cpe selectable via dip switch
?complies with ieee 802.3, ieee 802.3u and ieee 802.3xstandards
?dmt (discrete multi-tone) line coding
?half duplex back pressure and ieee 802.3x full duplex pause frameflow control
?support up to 1536 bytes packet size, ieee 802.1q vlan tagtransparent
?vdsl2 stand-alone transceiver for simple bridge modemapplication
?advantage of minimum installation time (simply asplug-and-play)
?selectable target data rate and target snr margin
?support extensive led indicators for network diagnostics
?co-work with anycan mc family media chassis ( ccpam1008)
?compact in size, easy installation
application

community / campus surveillance and security over ip

to take advantage of digital surveillance system and keep thebenefits of coaxial cable that can be used outdoor and longdistance, the ccpam1001 helps community, campus and enterprises to upgrade the analog camera to ip camera without new wire.the converter is a switching architecture with one rj45 10/100mbpsfast ethernet ports and one bnc symmetric ethernet over vdsl port.just plug-in the utp cable from ip camera to ethernet port and theexist coaxial cable to the bnc connector. it is easily deployed andis ideal for extending the distance and signal conversion bytransmitting the ethernet data from the standard coaxial cable..furthermore, with high transmit data rate, the solution supportsmultiple ip cameras input for sharing in one coaxial cable toreduce the cost of cabling.

iptv vod and digital message broadcasting services are theworldwide hot trends, and more and more service providers haveupgraded the client side devices from analog system to digitalsystem gradually. the ccpam1001 is the best solution to provide cost-effective, high speed network services by utilizingthe existing coaxial cable infrastructure. ip network installationis straightforward and requires no new wiring. with enoughbandwidth, the 100/65mbps symmetric capability of ccpam1001 enablesmany multi-media services on local internet to come true, such asvod (video on demand), voice over ip, video phone, iptv, distanceeducation, and so on. the ccpam1001 provides excellent bandwidth tosatisfy the triple play devices for entertainment andcommunication. meanwhile, this kind of infrastructure will minimizethe burden on the internet.

commercial location media network and electronic billboards

commercial location built media network and electronicbillboards to cover office buildings, shopping centers and stationsin the cities. integrating with set-top box and lcd tv, theccpam1001 provides an immediately and interactive broadcastingsystem over direct ethernet connection instead of constant contentand data exchange by human resource. it can also be integrated withiptv and web tv. through the remote ability of management,administrators can interrupt the tv program for the news and thecommercials. it saves labor and gets better commercialeffect.

specification

product ccpam1001
ethernet over vdsl 2+ converter
hardware specification
ports 10/100base-tx 1 rj-45, auto-negotiation and auto-mdi /mdi-x
coaxial 1 bnc, female connector　　

dip switch 4 position dip switch
functionality ?co / cpe mode select
?selectable fast and interleaved mode
?selectable target data rate
?selectable target snr mode
encoding ?vdsl-dmt
　　– itu-t g.993.1 vdsl
　　– itu-t g.997.1
　　– itu-t g.993.2 vdsl2 (profile 12a support), annex a
led indicators ?one power
?3 for rj-11 / vdsl2 wan :
　　?green, lnk
　　?green, co mode
　　?green, cpe mode
?2 for per rj-45 10/100base-tx port
　　?green, lnk / act
　　?green, speed
cabling ethernet ?10base-t: 2-pair utp cat.3,4,5 up to 100m(328ft)
?100base-tx: 2-pair utp cat.5, up to 100m (328ft)
vdsl ?50ohm, rg58a / u, rg58c / u, rg58 / u or e, up to1.6km
performance ? full vdsl2 bandwidth up to: (down stream / upstream)
?　200m ->100/65mbps ?　1000m ->100/42mbps
?　400m ->100/65mbps ?　1200m ->90/36mbps
?　600m ->100/58mbps ?　1400m ->80/27mbps
?　800m ->100/52mbps ?　1600m ->70/10mbps
dimension (h x w x d)35 x 142 x 160mm
weight 0.3 kg
power re 12 dc 1.5a
operating temperature 0~50 degree c
storage temperature -25~70 degree c
operating humidity 10% to 90% , relative humidity,non-condensing
storage humidity 10% to 90% , relative humidity, non-condensing
standard conformance
regulation compliance fcc part 15 class a, ce
standards compliance ieee 802.3 10base-t ieee 802.3u 100base-tx
itu-t
　　?g.993.1 (vdsl) ?g.997.1
　　?g.993.2 vdsl2 (profile 12a support), annex a

the actual data rate will vary on the of the coaxialcable and environment factors.

ordering information

ccpam1000ethernet over vdsl 2 converter (2 x rj11 , 1 xrj-45)
ccpam1001 ethernet over vdsl 2 converter (1 x bnc, 1 x rj-45)
relative product - media converter chassis
ccpam1008 8 port vdsl dslam 100~240v ac