類型開放式樣式立式品牌振亞型號XFJ別名橡膠細粉機用途Zui終成膠粉
[用途]
生產40-100目的精細橡膠粉體。
[結構與原理]
該機由叁臺粉碎主機，旋風收集機構、整套電器設備等組成。主機由機架、主電機、無級變速電機、送料機構、調節機構及一對動磨盤和定磨盤等組成。其基本原理為通過兩磨盤的相對運動，將物料剪切、碾磨而達到粉碎之目的。采用風、水冷卻有效地控制粉碎溫度，確保被粉物料之質量。送料機構選用無級變速，可根據不同物料，調節相應的進料速度，從而得到Zui理想的產量和質量。通過旋風收集機構，取走成品粉，全過程無任何粉塵飛揚。
[優點]
體積小、噪音低、產量高、能耗低、操作簡單、拆裝方便，無任何環境污染。所得膠粉細而均勻且粉體表面帶有眾多毛刺形，易與其它膠體結合。
［技術參數］
型號
總功率
進料粒度
成品細度
產量/小時
粉碎溫度
重量
外形尺寸（米）
xfj-210-?、?1kw10-30目40-100目80-200kg≤70℃2000kg3.5×3.5×5.5
se：to produce fine rubber powder of 40-100 meshes.
construction and principle：the unit consist of three maingrinder，whirlwind collecting mechanism，water cooling mechanism anda complete set of electric e。the main grinder consists ofthe frame，main motor，stepless variable speed motor，feedingmechanism，regulation mechanism and a pair of grinding dicss(amoving grinding disc and a static grinding disc)。
the basic principle is as follows：the material isground under the function of the shearing and grinding activated bythe rotation of the moving grinding disc。the water and the aireffectively control the temperature during the grind process,thusensuring the of the ground material。the stepless variablespeed motor is used for the feeding mechanism。the feeding speed canbe adjusted for the different material,thus achieving the mostideal capacity and 。the end powder is sucked out under thewhirlwind collecting mechanism.during the whole process，there is nopowder flying。
features：small size，low noise，high capacity，lowpower,easy to handle，convenience for operation and nopollution。
[用途]
生產40-100目的精細橡膠粉體。
[結構與原理]
該機由叁臺粉碎主機，旋風收集機構、整套電器設備等組成。主機由機架、主電機、無級變速電機、送料機構、調節機構及一對動磨盤和定磨盤等組成。其基本原理為通過兩磨盤的相對運動，將物料剪切、碾磨而達到粉碎之目的。采用風、水冷卻有效地控制粉碎溫度，確保被粉物料之質量。送料機構選用無級變速，可根據不同物料，調節相應的進料速度，從而得到Zui理想的產量和質量。通過旋風收集機構，取走成品粉，全過程無任何粉塵飛揚。
[優點]
體積小、噪音低、產量高、能耗低、操作簡單、拆裝方便，無任何環境污染。所得膠粉細而均勻且粉體表面帶有眾多毛刺形，易與其它膠體結合。
［技術參數］
型號
總功率
進料粒度
成品細度
產量/小時
粉碎溫度
重量
外形尺寸（米）
xfj-210-?、?1kw10-30目40-100目80-200kg≤70℃2000kg3.5×3.5×5.5
se：to produce fine rubber powder of 40-100 meshes.
construction and principle：the unit consist of three maingrinder，whirlwind collecting mechanism，water cooling mechanism anda complete set of electric e。the main grinder consists ofthe frame，main motor，stepless variable speed motor，feedingmechanism，regulation mechanism and a pair of grinding dicss(amoving grinding disc and a static grinding disc)。
the basic principle is as follows：the material isground under the function of the shearing and grinding activated bythe rotation of the moving grinding disc。the water and the aireffectively control the temperature during the grind process,thusensuring the of the ground material。the stepless variablespeed motor is used for the feeding mechanism。the feeding speed canbe adjusted for the different material,thus achieving the mostideal capacity and 。the end powder is sucked out under thewhirlwind collecting mechanism.during the whole process，there is nopowder flying。
features：small size，low noise，high capacity，lowpower,easy to handle，convenience for operation and nopollution。