充電樁產品測試及認證服務

Introduction of Charging Station Testing andCertification Services

安全認證，讓充電更安全

Safety approval,make charging safer

隨著全球新能源電動車的不斷發展，充電樁的需求也與日俱增，越來越多的國產充電樁

企業走向世界各地，而產品也必須滿足各個國家和地區的法律法規要求，即需要滿足對應的電氣安全、電磁兼容、人體防護安全、軟件技術安全可靠、數據通信/協議測試，無線和物聯網測試，功能安全測試等，為了充電樁的安全可靠性，設計師必須在早期設計階段將各標準的規范要求納入考慮，分析和評估可能會遇到的問題，Zui大可能的在設計階段降低成本和滿足認證要求。

With the continued development of Newenergy automobile,increasingly more of charging station has beenapplied to this field in the whole worth,which requies variouscharging station to adapt to the relatedlaws,directives,standards,such as electrical safety,EMC,Safety forPersonnel Protection Systems for Electric Vehicle, Softwarereliability in Programmable Components,communication data safetytesting,and function satety testing.To ensure charging stationreliability,all these related regulations and re must betaken into consideration at the early design stage,which will savethe time and money cost for the whole program.

我們的服務

Our services

?       認證咨詢：產品開發設計及整改階段的技術支持；

?       驗證試驗：按照測試標準的要求，對充電樁進行測試和評估；

?       認證服務：歐洲CE、北美UL認證及各國認證代理服務；

?       Consulting services:technical support during the development anddebugging stages

?       Validation test services:the related testing and evaluationaccording to the standards

?       Approval service:CE,UL and your required certification in eachcountry

北美充電樁認證-國產極品視頻這樣了-老色批精品97在線視頻標準介紹

Standards introduction for Charging station in NorthAmerican

?NFPA 70– NationalElectrical Code (NEC), Article 625 addressing Electric VehicleCharging System

? ANSI/UL 2202 – Standardfor Electric Vehicle (EV) Charging System E (AC toDC)

? ANSI/UL 2231-1* –Standard for Safety for Personnel Protection Systems for ElectricVehicle (EV) Supply Circuits: General

Re (referred toin UL 2202 / UL 2594)

? ANSI/UL 2231-2* –Standard for Safety for Personnel Protection Systems for ElectricVehicle (EV) Supply Circuits: Particular

Re forProtection Devices for Use in Charging Systems (referred to in UL2202 / UL 2594)

? ANSI/UL 2594* – Standardfor Electric Vehicle Supply E (AC to DC)

? UL 2750 – WirelessCharging E for Electric Vehicles (inDevelopment)

? ANSI/UL2251* – Electric Vehicle Plugs, Receptacles and Couplers

? UL 1998 – Standard forSoftware in Programmable Components

? UL 991 –Standard for Tests for Safety-Related Controls EmployingSolid-State Devices

歐洲充電樁認證-國產極品視頻這樣了-老色批精品97在線視頻標準介紹

Standards introduction for Charging station inEurope

?IEC61851-1 – Electric VehicleConductive Charging Systems – General Re

? IEC61851-21 – Electric Vehicle Conductive Charging Systems – Electricvehicle re for conductive connection

to ana.c./d.c. supply

? IEC61851-21-1 – Electric Vehicle Conductive Charging Systems –Electric vehicle on-board charger EMC re

forconductive connection to AC/DC supply

? IEC61851-21-2 – Electric Vehicle Conductive Charging Systems Electricvehicle re for conductive connection

to an AC/DCsupply - EMC re for off board electric vehicle chargingsystems

? IEC61851-23 – Electric Vehicle Conductive Charging System – DCelectric vehicle charging station

? IEC61000-6-1/2/3/4- Electromagnetic compatibility (EMC)