品牌LAC型號實驗室梯度爐 SPZui大電壓380（V）功率xx（W）額定溫度1300（℃）主要用途在多種溫度條件下一起進行一些樣品的燒窯測試

laboratory gradient furnacessp

梯度爐sp

application

firing tests of severalsamples together under various temperatures

description of theconstruction of the furnace:

*construction created by the l sections towhich are interpolated the metal plates forging themantle

*lid lay out by the isolation of the mineralgrain, procurated by the handrail

*isolation created by the sedge of the mineralgrain

*heating coils placed in the grooves on thelateral face of the furnace

*breaker on the back side of thefurnace

*thermocouple type s

*all electro element placed in the area belowthe turbace

*controller industry allows saving of 30control programs in the internal controller memory, each programcan consist of up to 15 steps, operator may start the selectprogram on a preset date and time thanks to the installed real timeclock

thestandard e of the furnace covers:

*driving zone controled by the controllerindustry, next 4 zones measured by the thermocouples connected tothe display cal

accessories for extracharge:

*multizone measurer ht 100 ( possibility ofthe scanning till 10 places )

*interface r 232/485

*software for the monitoring and the entry ofthe temperature cycle

benefits:

*acceleration of the firing of the samplesdone by the construction of the furnace

*top insulating materials ( low powerconsumption, possibility of the fast start to the desiredtemperature )

*very even temperature distribution at din 17052-1

*programmable temperatureadjustment

*solid state relays ( fluent and the silentrunning, minimum disturbance from the surrounding mechanism)

*perfect workshop processing, hardware andsafety in the service

應用范圍：

在多種溫度條件下一起進行一些樣品的燒窯測試

結構描述：

·不銹鋼外殼,l型鋼結構

·由礦物顆粒絕緣擺開的蓋子

·礦物顆粒苔草形成的絕緣

·加熱裝置置于熔爐側面的凹槽內

·熔爐后面的斷路器

·s型熱電偶

·所有電熱元件都被安裝在熔爐底部

·控制器工業允許在內部控制器內存節省30個控制程序，每個程序可以由15個步驟組成，由于安裝的實時鐘，操作員可以在預先設定日期和時間來開始選擇程序

標準設計包括：

·由控制器工業控制的操作區域,下面4個區域由熱電偶測量，連接到顯示cal

優點：

·高效的加溫速度

·頂部絕緣材料(低功率消耗,在被要求的溫度上快速開始的可能性)

·編程的溫度控制器

·溫度均勻性符合din17052-1

·固態繼電器(流暢和無聲的運轉,周圍機械裝置的Zui小干擾)

·完美的車間操作,硬件和使用中的安全設備

額外收費附件：

·多區域測量器ht 100 (到10個地方的掃描的可能性)

·界面r 232/485

·監控軟件和溫度周期的進入

可選型號：

類型

Zui高溫度

體積

外部尺寸

內部開口尺寸

輸入

重量

電壓

lac

°c

l

mm

mm

kw

kg

v

sp 30/13

1300

30

1700x1200x500

1400x140

7

240

400