刮削滾光機專用切削油

本產品針對刮削滾光機的設備特點，采用配方，以合成油精制礦物油為基礎，添加多種功能添加劑，用特殊生產工藝精制而成。

This product for deep hole gun drillprocessing, using the domestic advanced formula, using syntheticoil refined mineral oil as base, adding a variety of functionaladditives, special production process and refined

產品特性：

    1.安全性好，對人和環境無不良影響。

    2.優良的防銹性、潤滑性和極壓性，加工精度高。

    3.本品含有高滲透性潤滑劑，降低摩擦阻力及操作負荷。

    4.延長刀模具的使用壽命，減少槍鉆頭磨損斷裂。

    5.粘度合適且長時間保持不變，揮發性小，穩定性高。

    6.油品流動性好，排屑快，清洗性好。

    7.油品抗氣霧性能優良，油料消耗較少，使用成本較低。

Products characteristics:

    ● good safety, noadverse effects on people and the environment.

    ● antirust,lubrication and extreme pressure, high precision machining.Thisproduct contains high permeability lubricant, reducing friction andthe operating load.

    ● extend knife dielife, reduce the gun drill wear fracture.

    ● suitable viscosityand long time constant, low volatility, high stability.

    ● oil has goodfluidity, fast chip removal, cleaning and good.The excellentperformance of anti fog oil, fuel consumption is less, the use oflow cost。

產品用途：適用于不銹鋼、鋁合金、碳鋼、鑄鐵等各種材質工件的高速刮滾加工。

    Product use: machiningdeep hole gun is applicable to stainless steel, aluminum alloy,steel, cast iron and other materials of drilling, deep hole boringof workpiece. 

技術指標( ):

 

項目（project item）

質量指標（ index）

試驗方法（experimental method）外觀（exterior）

琥珀黃褐液體(Amber liquid)

目測（visualization）

運動粘度（kinematic viscosity）mm2/2、40℃

26-29

GB/T265

閃點開口(Flash pointopening)/℃

≥170

GB/T267

腐蝕/鋼片（Corrosion?/?steel?sheet）50℃，3h

合格（）

GB/T378

 

注意事項：密封儲存，防止日曬、雨淋或混入雜質，嚴禁與其他油品混用。

包裝及儲運：200升國標桶包裝，凈重170公斤/桶。

Note: sealed storage, to prevent thesun, rain or impurities, is strictly prohibited and other oilmixture.

Packing and storage: 200 liters GBdrum, net weight 170 kg / barrel.