專業各種,DC插座,DC電源插座,DC插口,DC接口,DC母座,,DC電源插頭,DC插頭,歡迎訂購-日本爽爽爽爽爽爽免費視頻_20厘米的粗黑巨物挺進. 

DC電源插座主要適用于各種電子產品。例如：玩具，手機，筆記本電腦，數碼產品，醫療設備，儀器儀表等。
DC電源插座SMT中心針有:0.5mm/0.7mm/1.0mm/1.1mm/1.3mm/1.65mm/2.0mm/2.5mm/3.0mm
DC插座型號有：DC-001，DC-003，DC-001A，DC-003A，DC-002，DC-004，DC-002A，DC-005，DC-002C，DC-005A，DC-005B，DC-009，DC-005C，DC-009ADC-006，DC-009C，DC-006A，DC-010，DC--006B,DC-011,DC-007,DC-011A,DC-011B,DC-013A,DC-012,DC-014A,DC-012A,DC-015,DC-012B,DC-015,DC-012B,DC-015A,DC-013,DC-015B,DC-015C,DC-020,DC-016,DC-021,DC-016A,DC-022,DC-017,DC-023,DC-018,DC-023A,DC-019,DC-023B,DC-024,DC-027,DC-025,DC-028,DC-025M,DC-028A,DC-025BM,DC-029,DC-026,DC-030,DC-026M,DC-030A,DC-031,DC-038,DC-031A,DC-038A,DC-033,DC-039A,DC-035-1,DC-040,DC-036,DC-041,DC-043,DC-048,DC-044,DC-049,DC-045,DC-049A,DC-046,DC-050,DC-074,DC-051,DC-047,DC-052,DC-053,DC-066,DC-055,DC-068,DC-056,DC-070,DC-060,專用尾插。
1.0構造Tectonic 
A型狀、尺寸依照制品圖而規定. 
Shape, size in accordance with the provisions of map products. 
B外觀:各部位應良好無秤銹、裂痕、電鍍不良現象. 
Appearance : the good parts should weigh no rust, cracks, electroplating ill. 
2.0 使用環境條件The use of environmental conditions 
A環境濕度Humidity: 25℃~+70℃ 
B 相對濕度Relative humidity: ≤93% (+40℃) 
C 機械性能Mechanical properties 
D 動作力Power moves:3~25N 
E 端子強度Terminal Strength
各端子在各方面承受500克力作用下,在10秒內,無脫落、破損等不良現象,但彎曲也可.
The terminals in all aspects under 500 Caledon role, in 10 seconds, without any loss, damage and other negative phenomena, but also bending. 
4.0 電氣性能Electrical Performance 
A 額定電流Current ratings:DC 12V 1A. 
B 接觸電阻Contact resistance:50mΩ以下. 
C 絕緣電阻Insulation Resistance:
在端子之間各端子與殼之間加AC 500V 條件下,持續1分鐘測試.100mΩ以上. The terminal between the terminal and Shell in between 500V AC conditions, sustained a minute test Ω m above .100. 
D 抵抗電壓Resistance voltage:
在端子之間端子與殼之間加 AC 500V 60Hz 條件下,持續1分鐘測量.無擊穿現象出現. In between the terminal and the terminal shell in between AC 500V 60Hz conditions, sustained a minute measurement. No breakdown phenomenon. 
5.0可靠性試驗Reliability Test 
A 壽命試驗Life Test
以涂有薄層潤滑脂的插頭(涂潤滑脂防止摩擦過熱)以每分鐘15~20次,無負載插座撥出5,000次，符合規格3.0和4.0規定值. Coated with a thin layer of grease plugs (TU Grease prevent friction overheated) per minute to 15 ~ 20, a no-load socket allocated 5,000, with the specifications 3.0 and 4.0 provides value 
B 溫度試驗Temperature Test
將插座放置于40±2℃,相對溫度90%~95%環境中,96個小時后取出,取去水滴,將插座放置于常溫常濕環境中,于30分鐘內測試,符合規格3.0和4.0要求. Socket to be placed on the 40 ± 2℃, relative humidity of 90% ~ 95% of the environment, 96 hours after the removal, taking a drop of water, will be placed in the socket temperature often wet environment, in the test within 30 minutes, with 3.0 and 4.0 specifications re