曼谷Bangkok  

地點 Location.：曼谷國際貿易展覽中心BITEC Bangkok International Trade and Exhibition Centre ( 88 Debaratna Road (km. 1) Bangna Tai. Bangna, Bangkok 10260, Thailand) 

展位號 Booth：1G11

機型 Machine：SA-290h

SA-h 高速成型系統

SA-h/p系列高速成型系統（射速415mm/sec），此系列機型將廣泛運用于食品包裝及醫療產業。具有以下優越特性： 
*高剛性模板設計、彈性變形小、成型鎖模力更低。 
*標配高速比例閥、開模響應更快、定位更準，循環周期短。 
*整體管路采用無焊接工藝、降低漏油風險，提升油路清潔度，延長機臺壽命。 
*標配紅外奈米加熱圈、升溫快、保溫性能好、節能超過30%。 
*采用PID溫度控制、可控制在±1°C。 
*采用大L/D比、高混煉螺桿、塑化效果好。 
*射臺及座移采用雙線軌設計、摩擦阻力低、精度更高。 
*中慣量單杠射出結構、起速快、重復精度高。 
*標配高性能伺服動力系統、節能Zui高可達70%。 
*獨特的模塊化設計、方便維修。 
*更可實現雙回路動作，Zui大程度縮短成型周期。  

The High-Speed & Thin-Wall Injection Molding Machine, SA-h/p Series (Injection speed 415mm/sec) are developed for food packaging and medical care.

SA-h/p Series Characteristic：
◆The pipelines adopt no welding processing, decreasing the risk of oil leaking.
◆Improving the cleanness of oil circuits and increase machine life.
◆Standard infrared heater, fast heating, good heat preservation, energy saving over 30%.
◆Adopt PID temperature control, temperature control within ±1℃.
◆Adopt large L/D radio, high mixing screw and good plasticization efficiency.
◆The injection unit support adopts high-precision double linear guides, the lower friction resistance, the higher precision.
◆The medium-inertia single-cylinder injection mechanism, fast response and high repeatability.
◆E with high performance servo power system, energy saving about 30%-70%.
◆Unique modular design, easy maintainanece.
◆Optional e with double loops system, improving production efficiency.